771633
15
Zoom out
Zoom in
Previous page
1/160
Next page
External View of Remote Controller
Loading of the battery
1. Remove the battery cover;
2. Insert AAA batteries (included) loading is in
line with the “+”/ “-”;.
3. Replace cover
<1> <2> <3>
Functional description
1. Power-up and Show All: After inserting the batteries the display
will show all symbols for 3 seconds. The remote will then enter clock
set mode. Use “+/-“ to adjust the clock. Press “Conrm” when done.
If no action is taken within 10 seconds then the remote will exit set
mode. See section 22 for clock setting instruction.
2. ON/OFF Button: Press the ON/OFF button on the remote control
to start the unit.
3. SMART Button:
(1) In SMART mode the air conditioner will automatically switch
between Cool, Heat, or Fan to maintain set temperature.
(2) When the fan is set to AUTO the air conditioner automatically
adjusts the fan speed according to room temperature.
(3) The SMART button also works to power the unit on and off.
4. COOL Button, HEAT Button and DRY Button
(1) In COOL mode ,the unit operates in cooling. When FAN is set
to AUTO,the air conditioner automatically adjusts the fan speed
according to room temperature. COOL will be displayed during COOL
mode.
(2) In HEAT mode ,warm air will blow out after a short period of
the time due to cold-air prevention function. When FAN is set to
AUTO,the air conditioner automatically adjusts the fan speed
according to room temperature. HEAT will be displayed during HEAT
mode.
(3) DRY mode is used to reduce humidity.In DRY mode, when room
temperature becomes lower than temp. setting+2°F,unit will run
intermittently at LOW speed regardless of FAN setting. DRY will be
displayed during DRY mode.
Mode SMART HEAT COOL DRY FAN
Initial TEMP. 24°C
(75°F)
24°C
(75°F)
24°C
(75°F)
24°C
(75°F)
Setting temperature
is not showed.
Mode SMART HEAT COOL DRY FAN
Initial Fan Speed AUTO LOW HI AUTO LOW
5. FAN SPEED Button:
Fan speed selection
Press FAN SPEED button. For each press,fan speed changes as
follows:
The air conditioner fan will run according to the displayed fan speed.
When FAN is set to AUTO,the air conditioner automatically adjusts
the fan speed according to room temperature.
6. TEMP. +/- Buttons:
Temp+ Every time the button is pressed,the temperature setting
increases.
Temp- Every time the button is pressed,temperature setting decreas-
es.
The operating temperature range is 60°F -86°F (16°C-30°C).
7. Quadrant Control
(Available for some models):
This setting allows the vertical airow to be adjusted individually on
each side of the unit.
(1) Initial default positions.
SMART HEAT COOL DRY FAN
Selected
Quadrant Show all Show all Show all Show all Show all
Vertical
SWING Angle Position 3 Position 5 Position 3 Position 3 Position 3
(2) Press the Quadrant Control button to select the quadrant. Each
button press will select as shown bellow:
(3) Once desired quadrant is selected then use the Vertical Swing
button to set the direction of airow. See section 9.
LOW, MED and HIGH
indicator cycles.
LOW MED HI AUTO FAN SPEED
11
Remote Controller Operation Manual
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier Cassette - all at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier Cassette - all in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 18.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info