656486

Haier AFL631NS Manual

25
Zoom out
Zoom in
Previous page
1/191
Next page
Icemaker use instructions (only on models with an icemaker)
Preparations before using the icemaker
Cut the water pipe to desired length while ensuring it free from excessive bend. Generally its
total length is not more than 5m. Excessive longer pipe may reduce water pressure and, as a
result, the water output flow-rate and ice-making capacity;
The water pipe should be away from any heat sources as it is not heat-resistant;
The water pipe should be installed and tested by authorized professional personnel;
The icemaker should be connected to a water source of a pressure between 1.5bar and 7bar;
Cleaning the ice cube tray
Deactivate the ice machine function from the
display panel,take out the icemaker assembly from
the refrigerator. Turn the icemaker over and you
can see the ice cube tray.
Pull the elliptical fastener of the icemaker in
direction .
Take out the ice cube tray in direction .
After cleaning, install it back in reversed
direction,push the ice machine firmly, close the
freezing door, and activate the ice machine
function from the display panel.
Precautions
Never install the icemaker's water tube in an area with the ambient temperature below 0 to
avoid icing of water in it.
The icemaker will start ice cube making when the internal temperature reaches or is below -
12 . (If the icemaker is used for the first time or after an extended period of vacation, the first
loads of cubed ices should be discarded as there are impurities in the water tube)
After the appliance is located, the water tube should be properly arranged to prevent it from
being crushed.
Installation of the icemaker can only be carried out by an authorized service agent.
This icemaker can only be supplied with drinking water.
Operating principle of the icemaker
8 cubed ices are made in every cycle. The ice making capacity depends on ambient
temperature, door-opening frequency, water pressure, freezer temperature and other conditions.
To ensure that the storage box is fully filled with cubed ices, arrange the cubed ices in the
drawer frequently.
As the icemaker makes 8 cubed ices in one cycle, it is normal that some of them stick to each
other (This can be improved by decreasing water supply duration).
Note
For a newly installed refrigerator, please let the appliance operate for 24 hours
before making ice.
If this is your first icemaker
Some “crack” sound may be heard in the process of ice making. Don't worry, it's normal.
Cubed ices stored for an extended period may become opaque or emit a strange odor. Please
empty the cubed ice storage box regularly and clean it with warm water. Before putting the box
back, make sure to cool it down and to dry it under sunshine. Otherwise cubed ices may
stick on the box.
If you do not want to use the cubed ice storage box for an extended period
Please take out all the cubed ices from the storage box and wash the box with warm water. Wipe
the box with a dry towel before replacing it to the appliance. After that, turn off the valve between
the water source and the appliance.
In order to obtain a larger available space of freezer storage compartment, the icemaker
assembly can be taken out and kept outside separately.
If you do not use cubed ices frequently
soft
22
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier AFL631NS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier AFL631NS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 10,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info