488510
3
Zoom out
Zoom in
Previous page
1/4
Next page
3
www.hager.com
6E 6175B
§
Warranty
NOT APPLICABLE FOR AUSTRALIA
A warranty period of 24 months is offered on hager
products, from date of manufacture, relating to any material
of manufacturing defect. If any product is found to be
defective it must be returned via the installer and supplier
(wholesaler). The warranty is withdrawn if:
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary
to IEE wiring regulations and accepted practice within the
industry at the time of installation.
- The procedure for the return of goods has not been
followed. Explanation of defect must be included when
returning goods.
O
F
F
EG071
§
1 channel time switch -
weekly cycle
User instruction
Function
The EG071 is a programmable time switch for
the automatic control of electrical loads.
It is fully programmable with a maximum of
20 program steps. Each program step can be
applied to one or several days, maximising the
use of each memory location.
The display will flash in case of power failure
to the unit.
The front cover is sealable preventing
unauthorised access after completion of
programming.
Presentation
Display :
1 time.
2 circuit status (ON or OFF)
3 Day of the week (1 = Monday, 2 = Tuesday
.. 7 = Sunday)
Buttons :
4 on/off chooses whether the circuit
is ON or OFF.
5 Prog to set the program and scroll
program steps.
6 reset
7 + and -: changes settings.
Time and day setting
Press key + or -”.
A continuous pressure on this key will scroll up
or down minutes, hours and then days.
Programming
1. To start programming, press key
Prog”, the first program step
flashes.
2. Set the switching time with key + or -
3. Use the on/off button to choose between
circuit ON and circuit OFF.
ON = contact between terminals 2 and 3.
OFF = contact between terminals 1 and 2.
4. Enter the settings by pressing Prog”.
You must now choose the days of the
week that the settings apply to.
5. With key + and -”, display one after the other
each day of the week and select with key
on/off if the program applies to this day or not.
Days to which the switching is to be applied
must be visible at the bottom of the display e.g.
1 2 3 4 5 visible, means switching will be applied
Monday to Friday.
6. Press Prog to enter this program step.
If no buttons are pressed within 2 min., the device
switches back to automatic mode without recording
your settings.
7. Program additional time settings by repeating
steps 2 to 6 above (20 max.)
To delete a program step, modify switching time
with keys “+” and “-”, until display -- :-- (between
23 :59 and 00 :00).
8. To record your settings and return to
automatic mode press Prog for more
than 2 seconds.
To turn the circuit ON or OFF
1. press the on/off button.
The display flashes.
2. use the on/off”, button to turn
the circuit ON or OFF.
To switch back in automatic mode, press on/off
for more than 2 seconds.
To check your settings
In automatic mode :
Press Prog repeatedly to display the day, the time
and the circuit status (ON or OFF).
To switch back to automatic mode, press Prog
for more than 2 sec.
To reset the time switch
Press the reset button, the program will be
cancelled.
Electrical connections
Technical specifications
Electrical characteristics
- supply voltage
230VƂ +10%/-15% 50Hz/60Hz
- power consumption = 1 VA
- output 1 changeover contact
µ 16A - 230VƂ AC1
µ 3A - 230VƂ cos
ϕ
= 0.6
- protection degree IP20
- insulation class II
- maximum operating height 2000m
- rated impulse voltage 4 kV
Functional characteristics
- accuracy ± 1sec / day at 20 °C
- operating reserve
lithium battery total of three years
- action type 1B
- degree of pollution 2
- software class A
Environment
- operating temperature -10 to +50 °C
- storage temperature -10 to +60 °C
- temperature for the ball pressure Test
75° and 125°C
Connection tunnel terminals
- flexible 0.5 to 2.5 mm
2
- rigid 0.5 to 4 mm
2
Dimensions
- 1 module (17.5 mm)
Standards
60730-1
60730-2-7
6E 6175B
L
N
65
EG071
21
43
12 3
OFF
on/off Prog
-
+
6
7
4
3
1
5
2
This device must be installed only by
a qualified electrician according to the
installation standards in force in the
country.
Usable in all Europe
å
and in Switzerland
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hager EG071 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hager EG071 in the language / languages: Dutch as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info