30
Modifying the PIN-code of the base
The base has his own PIN (Personnel Identification Number). At the factory
this PIN is set to 0000. You can change this number to every possible
combination of four digits.
1. Press the key MENU, and then three times on the scroll down key. The
screen displays "SETTING". Confirm with OK and press the scroll down
key once more, on the screen appears "BASE SETTING".
2. Press OK and then five times the scroll down key, on the screen
appears "CHANGE PIN". Confirm with OK, on the screen appears
"ENTER NEW PIN".
3. On the bottom line of the display appears a cursor (flashing
underscore). Input the four digits of your new PIN and confirm with OK.
4. The screen requests "CONFIRM NEW PIN". Input the new PIN a
second time and press OK to confirm.
5. When the two input codes are not identical, you will hear an error
signal. On the screen appears the text "WRONG PIN ENTERED"
during five seconds. The old code remains valid and you can start all
over again by pressing OK. The system then asks you to enter the new
PIN with the text: "ENTER NEW PIN _". Continue as described from
point 3.
6. When both codes are indentical, you will hear a confirmation signal and
the new PIN is being stored. The handset returns to stand by mode.
