659872
14
Zoom out
Zoom in
Previous page
1/28
Next page
14
Application
Exchange control unit filter
This filter (Art. No. 3752) has to be
exchanged after every 200 operat-
ing hours. Remove the old filter and
place the new one in its holder (see
picture).
Clamping the tool/ bur
Clamp the tools/bur only when the
handpiece is not working. Insert the
tool/ bur until it stops. Ones can use
all tools/ burs which has a shaft
according to ISO 104 with a diame-
ter of 2,35mm.
For security reasons, only
change the tool, if the hand-
piece is turned off.
Setting up the speed
Hold the handpiece (incl. tool) in
your hand or store it in the hand-
piece holder attached to the side of
the control unit.
Switch on the unit with button (8).
Now you can also set the speed
with buttons (3) and (4), and choose
its direction of rotation with button
(6).
When the device is brought
out of standby mode it will
run with the rotation speed
and suction power used last. Take
care to not start the mill at an overly
high rotation speed. Select the re-
quired rotation speed before chang-
ing the milling tool.
Foot switch (Art. 0970)
Operation of the footswitch:
Only use the original hadewe foot
switch, to avoid any damages.
Insert the plug of the foot switch into
the socket with the symbol
.
Function of the foot switch
Press foot switch:
Switch ON/OFF the item.
When working with a foot switch,
take care that you only use instru-
ments that are approved for use at
the maximum speed of the device
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hadewe Helius R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hadewe Helius R in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info