659862
16
Zoom out
Zoom in
Previous page
1/28
Next page
16
Use
Clamping the tool/ bur
The handpiece is equipped with a
chuck, which can hold all burs with
a diameter of 2.35 mm (this is the
diameter usually used for tools in
podiatry). To open the chuck, push
the knob forward with your thumb
and leave it there. Now insert the
tool as far as possible. Pull back the
knob and the tool will be firmly
clamped
For security reasons, only
change the tool, if the
handpiece is turned off.
Setting up the speed
Hold the handpiece (incl. tool) in
your hand or store it in the hand-
piece holder attached to the side of
the control unit.
Switch on the unit with button (14).
Now you can also set the speed
with buttons (2) and (3), and choose
its direction of rotation with button
(4).
Memory button M1-M3
Frequently used speed or suction
levels can be saved. Therefore
three memory buttons are available.
At first, choose your speed / suction
level, and then save it by pushing
button M1 for 4 seconds. To recall
the above combination of speed
and suction level, simply press but-
ton M1 again.
Further combinations can be saved
with M2 and M3
Button on the handpiece
If you press this button once (for a
short time), you can recall the
memorised combination of speed
and suction you saved under M1.
By pressing the button once again
(shortly), you recall the M2 setting.
You can switch between settings
M1 and M2 (not M3 though) by
using this button.
If you press the button on the hand-
piece for a longer period, you will
switch on / off the complete control
unit.
Attention! Only use burs/
tools which are permitted
for speed level saved
under M1 and M2!
When the device is brought
out of standby mode it will
run with the rotation speed
and suction power used last. Take
care to not start the mill at an overly
high rotation speed. Select the re-
quired rotation speed before chang-
ing the milling tool.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hadewe Auroria at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hadewe Auroria in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hadewe Auroria

Hadewe Auroria User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info