564793
14
Zoom out
Zoom in
Previous page
1/19
Next page
14
9.1.8. Fill manually (Optional only on HSP8)
on
screw conveyor off
main menu
Fill manually
Procedure:
Place the cursor in the main menu on “Fill manually”. Press “OK” button on the right to switch on.
The screw conveyor then turns, thus feeding the pellets. As soon as the pellets move into the burner via the chute,
the feed process is stopped by pressing the “OK” button.
Filling manually is used for the first use and when the pellet tank has emptied.
9.1.9. Contrast brightness display
OK
heating curve
contrast
main menu
date/time
language english
Procedure:
The required value can be selected with the “Plus” or “Minus” buttons.
The setting is saved by pressing the “OK” button.
To exit the function, press the “On/Off” button.
9.1.10. Software version information
Info Software
SW-Version: HSP-6-V5.03
test date: 2015-02-11
Procedure:
To exit the function, press the “On/Off” button.
10. Operating statuses:
10.1. Start Zone 1-20 ( Start phase )
The start phase begins if:
the current room temperature falls below the set target temperature by 1°C
the stove is cooled down to a temperature below 70 C°
During the “Start phase”, the burner tray is filled with a precisely defined amount of fuel and this fuel is ignited using
an electric ignition.
The whole “Start phase” can go through up to 20 zones. It finishes after reaching a precisely defined temperature at
the “flame temperature sensor” and the control system puts the stove into “Heating mode”.
The duration of the “Start phase” can therefore vary.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn PELLETTO-RLU 418.08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn PELLETTO-RLU 418.08 in the language / languages: English as an attachment in your email.

The manual is 0.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn PELLETTO-RLU 418.08

Haas-Sohn PELLETTO-RLU 418.08 Usermanual and installation guide - German - 34 pages

Haas-Sohn PELLETTO-RLU 418.08 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info