564789
16
Zoom out
Zoom in
Previous page
1/34
Next page
16
9. Description of the components
9.1. Storage container (pellet tank)
32 kg of wood pellets can be stored in the storage
container. This quantity permits constant operation for
up to 50 hours.
9.2. Screw conveyor motor / screw conveyor
The screw conveyor motor drives the screw conveyor.
This delivers the wood pellets from the storage container
to the combustion chamber (combustion pot). The screw
conveyor motor’s rotation speed is regulated and it
therefore delivers the required supply quantity to the
modular heat output (2.5 kW to 8 kW).
Figure 10: Screw conveyor motor
1 = Screw conveyor motor
2 = Condenser
3 = Thermosensor, flue gas
4 = Induced draught fan
5 = Overheat cutout
6 = Master switch
7 = Mains socket
8 = Heat exchanger
9 = Outside air connection
9.3. Combustion pot with tray:
The combustion pot is made of high-grade stainless
steel. The special design of the combustion pot
guarantees clean and extremely efficient combustion of
the wood pellets.
Figure 11: Combustion pot correctly installed
9.4. Electric ignition
The built-in electric ignition is made of stainless steel
(see Figures 13+14) and generates the ignition
temperature required to ignite the wood pellets. The
period during which ignition is activated depends on how
quickly the required flame temperature is reached so
that the system can switch from the Ignition phase to
Heating mode. The average ignition glow time is 10 to
12 minutes (depending on pellet quality). The ignition
phase is restricted to a maximum time of 21 minutes and
therefore the maximum ignition glow time is also
restricted to 21 minutes. Depending on the fuel quality,
the flame should be formed in 6 to 10 minutes.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn PELLETTO 417.08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn PELLETTO 417.08 in the language / languages: English as an attachment in your email.

The manual is 3.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn PELLETTO 417.08

Haas-Sohn PELLETTO 417.08 Usermanual and installation guide - German - 34 pages

Haas-Sohn PELLETTO 417.08 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info