564787
9
Zoom out
Zoom in
Previous page
1/19
Next page
9
7.3.2.4. Setting TARGET room temperature (required room temperature)
28°C
 23°C
 off
+ - OK
10:34
Procedure:
The “TARGET room temperature” is set with the “Plus” or “Minus” buttons.
The set value is saved by pressing the “OK” button.
The “TARGET room temperature” can be changed at any time as often as you want during operation with the “Plus”
or “Minus” buttons.
Prerequisite: The welcome page must be shown on the display.
7.3.2.5. Starting the pellet stove - operating mode ON
10:34
26°C
 23°C
 start zone 1
off menu
Procedure:
On the standard screen, press the “On/Off” button to get the stove started.
Start Zone 1 now appears under “Operating status” and the start process begins.
By pressing the On/Off” button again, the stove is switched back off.
OFF then appears under “Operating status”.
The stove performs the ENTIRE start phase, however, until it reaches the necessary flame temperature and only then
switches to the cooling operating status and then OFF.
During the first use, odours may build up for a short time. Please ensure that there is adequate ventilation in
the installation room during this time and avoid inhaling directly!
General:
If the start phase could not be successfully completed i.e. no flame generation or the required temperature could not
be reached at the flue gas thermosensor, then a safety shutdown is initiated and an error message generated (“Error
2 Date and time”). Before starting again, empty the burner and replace it.
8. Additional operator console functions
8.1. Backlighting
The backlighting of the display is switched off 5 minutes after the operator console was last operated and switches to
energy saving mode.
The backlighting is switched on by pressing on button. The function buttons are only active once the backlighting has
been activated. The backlighting is also activated by an error message being triggered.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn PALLAZZA-RLU 518.08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn PALLAZZA-RLU 518.08 in the language / languages: English as an attachment in your email.

The manual is 0.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn PALLAZZA-RLU 518.08

Haas-Sohn PALLAZZA-RLU 518.08 Usermanual and installation guide - German - 34 pages

Haas-Sohn PALLAZZA-RLU 518.08 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info