564781
11
Zoom out
Zoom in
Previous page
1/33
Next page
11
6.4..4 Desription Heating profile
h003
+ - OK
( 2 ) 2
Heating profile
Heating profile
Setting range
Setting range from 1 to 4
Factory setting: 2
The value to be set depends on the size of the room that
is to be heated.
Guideline values:
Room size 20m² - Value 1
Room 25m² - Value 2
Room 30m² - Value 3
Room bigger than 30m² - Value 4
With older stoves a higher value should be set (over 3)
so as to avoid excess condensation in the fireplace.
Procedure:
In the main menu, place the cursor on “Heating profile”
Press the right “OK” key.
Adjust the value with the two middle keys
Then press the right “OK” key.
If you would like to quit this menu screen without saving,
press the left “Back” key.
6.4..5 Desription: ECO Mode
OK
No
>Yes
Main menu
ECO-Mode
The Eco mode means the permanent operation with low
output, if the "real room temperature" is higher than the
set "required room temperature".
If the stove is operated in the ECO operating mode, the
heating output will be decreased after exceeding the
"required room temperature", i.e. the stove is not
switched off, but continues to heat with a "small flame".
When the Eco operating mode is set and the "real room
temperature" of 30°C is exceeded, the Eco mode will be
automatically switched off and the pellet stove will
continue to heat without the Eco mode function.
Warning:
The Eco mode can be reactivated at the controlling unit
in the main menu with the use of "Eco mode - YES".
Procedure:
Set the cursor to the "ECO mode" in the main menu.
Press the right "OK" push-button.
Change the setting with the use of both middle push-
buttons.
Then press the right "OK" push-button.
6.4..6 Desription Display brightness - contrast
setting
OK
Heating profile
Contrast
Main menu
Date/time
Language english
Procedure:
Set the Courser on "Contrast" and press OK.
By pressing the middle button + and you
adjust the Contrast.
Confirm by pressing the OK button.
To exit, press the left button.
6.4..7 Software Version
Info Software
SW-Version: HSP-6-V2.03
Test date: 2014-02-11
Procedure:
Set the Courser on "SW-Version" and press OK.
The current version is displayed.
To exit, press the left button.
6.4..8 Fault screen (top field in the display)
On Quit.
+++ Disturbance +++
F018
16:18
26°C
23°C
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn PALLAZZA-II 534.08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn PALLAZZA-II 534.08 in the language / languages: English as an attachment in your email.

The manual is 4.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn PALLAZZA-II 534.08

Haas-Sohn PALLAZZA-II 534.08 Usermanual and installation guide - German - 34 pages

Haas-Sohn PALLAZZA-II 534.08 User Manual - French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info