812049
27
Zoom out
Zoom in
Previous page
1/36
Next page
27
combustion chamber” instruction, is automatically
reset to zero.
This reset of the operating hours counter occurs
even if the cleaning of the combustion chamber is
performed before the 50 operating hours have run
provided that the stove is in “Off” operating status
and the door is open for longer than 60 seconds
during cleaning.
20. Error in parameters Factory settings have
been uploaded Fault has been cleared (60)
Cause:
Program fault
Defective part in the operator console.
Correction:
Contact the service engineer
21. Backup battery empty
Cause:
Backup battery of the central unit is
empty
Backup battery not connected
Correction:
Check connection
Replace backup battery
Contact the service engineer
22. Error data transmission IO19 ( D3 ) Check
cable (6000)
Cause:
No connection between operator console
and central unit
Component fault in the central unit
Correction:
Check connection cable between
operator console and central unit
Contact the service engineer
23. Error data transmission IO19 ( D5 ) Check
cable (6001)
Cause:
No connection between operator console
and central unit
Component fault in the central unit
Correction:
Check connection cable between
operator console and central unit
Contact the service engineer
24. Error data transmission IO19 ( D6 ) Check
cable (6002)
Cause:
No connection between operator console
and central unit
Component fault in the central unit
Correction:
Check connection cable between
operator console and central unit
Contact the service engineer
25. Error, Amtel version ( D3 ) (6100)
Cause:
Component fault in the central unit
Correction:
Contact the service engineer
26. Error, Amtel version ( D5 ) (6101)
Cause:
Component fault in the central unit
Correction:
Contact the service engineer
27. Error, Amtel version ( D6 ) (6102)
Cause:
Component fault in the central unit
Correction:
Contact the service engineer
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn PALLAZZA 532.08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn PALLAZZA 532.08 in the language / languages: English as an attachment in your email.

The manual is 4.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn PALLAZZA 532.08

Haas-Sohn PALLAZZA 532.08 User Manual - German - 36 pages

Haas-Sohn PALLAZZA 532.08 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info