812048
21
Zoom out
Zoom in
Previous page
1/36
Next page
21
Figure 16:
1 = Mains socket
2 = Main On/Off switch
3 = OC overheat cutout
4 = Flue elbow 80 mm
5 = Outside air connection 57 mm
6 = Room temperature sensor
7 = Bottom of back wall
9.11. OC Overheat cutout
The overheat cutout sensor is located on the
screw conveyor tube. When a certain temperature
is reached, the OC is triggered independently of the
control unit and it cuts the stove off from the
electricity supply. (Thermo protection).
9.12. Combustion chamber cladding
The combustion chamber is clad on its three
casing surfaces, the left side wall, the right side
wall and the back wall with the material Vermiculite.
Figure 17 : Combustion chamber
1 = Combustion chamber cladding, left
2 = Combustion chamber cladding, back
3 = Combustion chamber cladding, right
4 = Flame temperature sensor
5 = Bottom temperature sensor
6 = Combustion pot
7 = Combustion tray
8 = Pellet chute
9 = Door contact switch
9.13. Flue tube connection
The diameter of the flue elbow is 80 mm. The flue
tube must be connected to the fireplace in
accordance with official regulations. For questions
in connection with this, please contact your local
chimneysweep. Because of the way the pellet
stove works with a combustion air fan, high
pressure is generated at the flue gas outlet and
possibly in the fireplace. This means that the flue
gas pipes must be designed to be gas-tight as far
as their entry into the fireplace.
9.14. Mains cable and master switch
Important! The electricity supply to the pellet stove
must always be present! No time switches or other
electric switches may be inserted in or before the
stove’s mains cable. Otherwise your pellet stove
may suffer damage. The master switch for your
pellet stove is located next to the mains cable
socket.
Figure 18:
1. Master switch
2. OC (overheat cutout)
3. Mains cable socket
4. Room temperature sensor (output)
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn PALLAZZA 517.08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn PALLAZZA 517.08 in the language / languages: English as an attachment in your email.

The manual is 4.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn PALLAZZA 517.08

Haas-Sohn PALLAZZA 517.08 User Manual - German - 36 pages

Haas-Sohn PALLAZZA 517.08 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info