Manual Haas-Sohn OVALIS PICCOLO (page 2 of 11) (English)

564813

Zoom out

Zoom in

1/11

Congratulations! You have just bought the stove HAAS + SOHN, a top-quality product.

Thank you very much for your interest and purchase. Kindly read the Operating

Instructions to find out comprehensive information about the function, correct use and

handling. We recommend you to read the instructions carefully in order to avoid any risk

related to likely damage. Proper operation and maintenance affects the service life of the

product as well. In addition, proper operation and fuel supply is connected with fuel savings

and environment protection. Technical specifications are included in the manual.

The manufacturer provides guarantee providing you adhere to the directions and

recommendations in the instructions for operation and maintenance. Keep the operating

instructions and technical card safe to be able to refresh your knowledge at the beginning

of the new heating season.

1. TECHNICAL SPECIFICATIONS

The fireplace stove is designed for heating in habitable rooms, recreational buildings, work

stations and other places to provide thermal comfort, while the visual effect – the

perception connected with flame – is similar to the sensation of live fire.

1.1. Heating concept

The fireplace stove is designed for burning wood, eco-fuel cakes and coal cakes (specific

types only) in a burning-through way, characteristic with very good firing conditions.

The air within the room is heated thus the thermal comfort is provided by heat convection,

in part by heat radiation as well. This way, you can heat up even very cold, long-time

unheated rooms very quickly. The concept of heating by means of heat convection is based

on the fact that the air in the room enters the fireplace stove at its bottom part, being heated

in the course of its way up inside the convection space consisting of a double shell of the

heating device. The air then flows through the holes in the upper part of the fireplace stove

back in the room. The radiation heat is generated by means of surface areas of the

fireplace stove (metal, ceramics, glass). Due to the construction, the biggest radiation heat

source is the glass door.

1.2. Construction design

The fireplace stove is welded of steel profiles, thickness 2-5 mm. In the middle of the

fireplace stove, there is a firing chamber that may be closed with a stocking door (equipped

with a self-acting element). The door is provided with special a large-area glass sheet,

thermal resistance up to 800 °C.

The inner space of the firing chamber is usually lined with fireclay brick shapes. The bricks

are not jointed with any filler (the reason is a protection of the bricks against damage by

thermic dilatation). The upper part of the firing chamber is equipped with partitions

designed for directing flue gases into a smoke outlet. The partitions may be fixed or

movable. Such movable partition may serve as a supporting holder for fireclay bricks. At

the bottom part of the firing chamber, a simple, fixed cast grate is installed. Before the

grate, a barrier is usually provided, to prevent from burning pieces falling out or onto the

door (front glass). Under the grate, there is a space designed for ashpan. The remaining

space at the bottom part of the fireplace stove may be used for spare fuel.

Fireplace stove casing is made of steel panels, ceramic tiles or lined of thick tiles. The

fireplace stove steel construction is protected with special refractory paint.

Caution! The fireplace stove is not designed for continuous heating but for

periodical – interrupted (i.e. temporary) operation.

4 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn OVALIS PICCOLO in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Haas-Sohn OVALIS PICCOLO Manual

Product: