564767

Haas-Sohn MOLDE Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
GB
3
• The tube of the smoke flue must not be installed with a gradient towards the chimney.
• There must be paid attention unconditionally that the tube of the smoke flue may not protrude into clear
diameter of the chimney; it would disturb the upward lift of the combustion products and would make an
optimum cleaning of the chimney more difficult.
• Longer horizontal sections of smoke flue tubes reduce the necessary draft of the chimney.
• Al the orifices mouthed into the same chimney, such as cleaning orifices of the stove and of the chimney,
must be shut.
• In case of multiple employment of the chimney, the minimum vertical distance of two chimney connections
ought to be 30 cm at least. As a matter of principle, the fire places must be suitable and approved for
multiple employment of the chimney.
4. Emplacement
4.1. Minimum distances from inflammable construction parts:
CAUTION
As a matter of principle, the emplacement of a fireplace stove must observe the valid official fire-fighting
regulations.
In this respect, please observe the international regulations.
WARNING
Caution! As minimum distances from inflammable materials or materials sensitive to heat (e. g. furniture,
wallpapers, wooden linings), or load-bearing walls respectively, there must be respected the distances shown
in the type plate.
In case of inflammable floorings or the flooring sensitive to heat, the appliance must be placed on an
incombustible floor plate (e. g. a glass panel) (see the drawing).
Recommended protection of the floor:
A 50 cm – in the front
B 30 cm – from the inside edge of the combustion space
C see the type plate – extent of radiation from the window
Safety distances from inflammable construction parts:
In the rear - see the type plate
On the side - see the type plate
In the front in the extent of radiation - see the type plate
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn MOLDE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn MOLDE in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn MOLDE

Haas-Sohn MOLDE User Manual - German - 6 pages

Haas-Sohn MOLDE User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info