812046
26
Zoom out
Zoom in
Previous page
1/32
Next page
DE
22
F. Zu dichter Raum notwendige
Verbrennungsluft kann nicht in den Raum
nachströmen
G. Flammentemperaturfühler defekt
H. Schneckenmotor defekt
F. Für ausreichend Verbrennungsluft sorgen -
Ofen mit Außenluft anschließen
G. Flammentemperaturfühler defekt - Service
kontaktieren
H. Schneckenmotor defekt - Service
kontaktieren
F0027 A. Brenner verschmutzt
B. Brenner liegt nicht bündig auf
C. Türe undicht
A. Brenner reinigen
B. Brenner richtig positionieren
C. Dichtung bei Türe kontrollieren
F0028 A. Brenner / Brennraum verschmutzt
B. Flammentemperaturfühler unten defekt
A. Brenner reinigen
B. Service kontaktieren
F0033 A. Keine WLAN Verbindung
B. WLAN Schlüssel ist falsch
C. Keine IP Adresse erhalten
A. WLAN Empfang prüfen
B. WLAN Schlüssel prüfen
C. DHCP Einstellungen am Router prüfen
F0034 A. Keine Internetverbindung vorhanden A. Internetverbindung prüfen
F0040 A. Brennraum wurde nicht im vorgegebenen
Zeitintervall gereinigt
A. Brenner und Brennraum reinigen im
Betriebszustand „AUS“ muss die
Brennraumtüre geöffnet werden. Mittels
Aschesauger wird der Brenner sowie der
Brennraum sorgfältig gereinigt. Hierbei muss
die Brennraumtüre länger als 60 Sekunden
geöffnet sein, damit es zu einer automatischen
Quittierung der Fehlermeldung kommt.
F0041 A. Wartungsintervall überschritten (1000kg) A. Reinigung der Rauchgaszüge
F0050 A. Pufferbatterie leer A. Batterie auf Steuerung tauschen (CR 2032)
F1000 /
W1000
A. Neustart der Hardware A. Gerät stromlos Info Anzeige im
Fehlerspeicher
W0042 Information Wartung wurde zurückgesetzt
15. Allgemeine Hinweise / Störungen
Störung: Ursache: Behebung:
Pelletofen startet nicht 1. Die eingestellte Raumtemperatur
SOLL ist niederer als die momentane
Raumtemperatur IST
2. Abgastemperatur ist zu hoch
3. Fehler ist aufgetreten
4. Fehler ist aufgetreten im
Wochenprogramm ist keine
zugeordnete Zeitzone
1. Raumtemperatur SOLL erhöhen.
2. Gerät abkühlen lassen
3. Siehe Fehlerbehebung Punkt 15.1.
4. Wochenprogrammierung anpassen
Punkt 10.1.1.
Display keine Anzeige 1. Loses oder defektes
Verbindungskabel zwischen
Bedieneinheit und Steuerung
2. Kontrast verstellt
1. Service kontaktieren
2. Kontrast neu einstellen
Saugzuggeräusche 1. Asche in Gebläsegehäuse 1. Asche mit Aschesauger reinigen
Knack oder Tick Geräusch
Bedenken Sie, dass diese entstehenden Geräusche nicht zu vermeiden sind.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn HSP 8 LUCCA-II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn HSP 8 LUCCA-II in the language / languages: German as an attachment in your email.

The manual is 1.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn HSP 8 LUCCA-II

Haas-Sohn HSP 8 LUCCA-II User Manual - English - 32 pages

Haas-Sohn HSP 8 LUCCA-II User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info