811996
12
Zoom out
Zoom in
Previous page
1/15
Next page
8
7.
Defects, reasons
Defect: Reason: Suppression:
The stove heats badly or smokes:
The draft of the chimney is too
low (min. 10 Pa. in the neck of
combustion products)
Seal the chimney cleaning
orifices that are not tight.
Have the draft of the chimney
measured by the chimneysweep
in charge.
The stove or the smoke flue tubes
are clogged with soot
The stove and the smoke flue
tubes are to be cleaned in time
The connection tube of the stove
to the chimney is not tight
Check the connection tube and
seal it
The amount of fuel in the stove is
excessive
Use the amount of fuel as per the
specification
The stove has not been con-
nected properly, or the chimney
is overcharged
Consult the
chimneysweep
The input of external air is missing Day-to-day shock ventilation
Bad weather conditions
(transition seasons)
If necessary, set the air regulator
to position pressed in".
Too large wood logs Use smaller logs (max. 0.7 kg/
piece)
The fuel is burning too fast:
Appliance not tight (sealing of
the door, of the glass)
Replace the sealing
The draft of the chimney too big
(min. 20 Pa. in the neck of com-
bustion products)
Have a draft limiter installed
The glass of the door gets
soiled quickly:
Wet wood stock Check up, max. 17 % of residual
moisture
Too large wood logs Use smaller logs (max. 0,7 kg/
piece)
The draft of the chimney is too low
(min. 10 Pa. in the neck of com-
bustion products)
Seal the chimney cleaning
orifices that are not tight.
Have the draft of the chimney
measured by the chimneysweep
in charge.
Air regulator always open:
position pressed in".
When the product is burning
briskly, the air regulator should be
in the extracted" position
The draft of the chimney too big
(min. 20 Pa. in the neck of com-
bustion products)
Have a draft limiter installed
The door glass has milky colour Overheating New glass
Bothering smoke:
The fuel has not burned down
completely
Stoke new fuel on live embers
only (no flame)
The draft of the chimney is too
low (min. 10 Pa. in the neck of
combustion products)
Seal the chimney cleaning
orifices that are not tight.
Have the draft of the chimney
measured by the chimneysweep
in charge.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn Engadin Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn Engadin Plus in the language / languages: English as an attachment in your email.

The manual is 2.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn Engadin Plus

Haas-Sohn Engadin Plus User Manual - German - 15 pages

Haas-Sohn Engadin Plus User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info