812037
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
24. Errors in parameters Works settings were
loaded - error was acknowledged (60)
Cause:
Program error
Defective component on the operating unit.
Remedy:
Contact service technician
25. Buffer battery empty
Cause:
Buffer battery on the operating unit is empty
Buffer battery not connected
Remedy:
Check connection
Renew buffer battery
Contact service technician
26. LED board not connected (51)
Cause:
The connection between LED board and
central unit is interrupted.
This can be caused by the following:
Connecting line on the LED board or on the
central unit is not connected or defective
Remedy:
Check if the connecting line is connected to the
LED board and to the central unit
Contact service technician
27. Error - data transmission IO19 ( D3 ) Check
cable (6000)
Cause:
No connection between operating unit and
central unit
Component error on the central unit
Remedy:
¾ Check connecting line between operating unit
and central unit
¾ Contact service technician
28. Error - data transmission IO19 ( D5 ) Check
cable (6001)
Cause:
No connection between operating unit and
central unit
Component error on the central unit
Remedy:
¾ Check connecting line between operating unit
and central unit
¾ Contact service technician
29. Error - data transmission (IO19 ( D6 ) Check
cable (6002)
Cause:
No connection between operating unit and
central unit
Component error on the central unit
Remedy:
¾ Check connecting line between operating unit
and central unit
¾ Contact service technician
30. Error Amtel version ( D3 ) (6100)
Cause:
Component error on the central unit
Remedy:
¾ Contact service technician
31. Error Amtel version ( D5 ) (6101)
Cause: Component error on the central unit
Remedy:
¾ Contact service technician
32. Error Amtel version ( D6 ) (6102)
Cause: Component error on the central unit
Remedy:
¾ Contact service technician
33. No connection to GSM Module– check cable
(30)
Cause: Connecting line between service
connector and the GSM module is
interrupted
Connecting line between operating unit
and service connector is interrupted or
not connected
Remedy:
Check connecting line between operating unit and
service connector
Check connecting line between service connector
and GSM module
Contact service technician
34. GSM sending error check receiving/SIM card
(31)
Cause:
The oven is unable to send an SMS to the operator
mobile phone
This can be caused by the following:
SIM card defective
Poor reception, no network available
The pin code of the SIM card is not deactivated
Remedy:
Check if network and reception is available.
Check if pin code is deactivated
Replace SIM card
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn ECO-PELLET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn ECO-PELLET in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn ECO-PELLET

Haas-Sohn ECO-PELLET User Manual - German - 43 pages

Haas-Sohn ECO-PELLET User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info