812037
25
Zoom out
Zoom in
Previous page
1/40
Next page
25
Before inserting the SIM-card, the security code
for the SIM-card (PIN-code request) must
definitely be deactivated!!
This takes place by operating the SIM-card in
another mobile phone. All security functions
must be deactivated i.e. no security inquiry may
appear when the mobile phone is switched on.
Only then can the SIM-card be used in the
GSM-module.
10.3.2 Inserting the SIM card in the GSM
module
If one pushes in the yellow button on the
module with a pointed object, the SIM-card
holder jumps out of the module. Withdraw the
holder, insert the SIM-card and reinsert the
holder into the opening on the module.
Picture 26: Inserting SIM-card
10.3.3 Connecting plug-in power unit with
GSM module
The connector of the plug-in power unit is to be
connected to the connection provided on the
GSM-module.
Picture 27: Connection of plug-in power unit
After the plug-in power unit has been
connected to the power network, the lamp on
the plug-in power unit must light up.
The GSM module begins to search for a mobile
radio network. This is signaled by constant
flashing of the LED on the GSM-module in a 2
sec. cycle. If a network has been found and the
module has registered, then the LED only
flashes briefly every 4 sec.
10.3.4 Starting the pellet stove via mobile
phone
Overview of the GSM commands (whether the
individual characters are input in upper- or lower
case is irrelevant):
*** telnew06761234567#
Set operator telephone number to 06761234567.
DE: :***baaus
ENG: ***baoff
FRA:. ***baarret
ITA: ***baoff
Set boiler operating mode to OFF.
DE: ***baheiz
ENG: ***baheat
FRA: ***bachauffe
ITA: ***barisc
Set boiler operating mode to HEATING. It is
regulated to the last target room temperature
set in the controller.
***baheiz-rt25#
Set boiler operating mode to HEATING. Target
room temperature is set to 25°C.
***baauto
Set boiler operating mode to AUTO. Heating
according to the set timer program and
respective target temperatures.
***i
An information message is sent to the
operator’s mobile phone.
In addition all faults are sent to the operator’s
mobile phone number. These faults can be
acknowledged with the command
***quit
10.4 Technical Specifications of the GSM
Module
Main connection voltage: 230VAC
Mains frequency: 50Hz
Housing dimensions TC35 Terminal: 65 x 74 x
33mm
Bus-interface: RS232 for the connection to a
PC or Laptop
Radio network: Dual band EGSM900/GSM1800
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn ECO-PELLET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn ECO-PELLET in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn ECO-PELLET

Haas-Sohn ECO-PELLET User Manual - German - 43 pages

Haas-Sohn ECO-PELLET User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info