812037
23
Zoom out
Zoom in
Previous page
1/40
Next page
23
Picture 19 : Furnace
1 = Flame or furnace temperature sensor
2 = Furnace lining
3 = Pellet down-pipe
4 = Burner pot
9.16 Optical visualization of the burner
soiling by means of three different-colored
light-emitting diodes – similar to a “traffic
light control“
The degree of soiling of the burner pot is
measured before every ignition operation and
also during the operation at regular intervals.
The optical visualization of the soiling in the
burner pot takes place by means of LED’s, that
are positioned near the front panel of the stove
and have the colors green, yellow an red (similar
to a “traffic light control“).
Depending on the degree of soiling determined,
either the green, yellow or red LED lights up.
The lighting up of the green LED means:
If the green LED lights up, then that means, that
the burner pot is clean and without impurities and
the combustion in the burner pot can and is
supplied with sufficient combustion air. The stove
can continue its operation without restrictions.
The lighting up of the yellow LED means:
If the yellow LED lights up, then that means, that
the burner pot is slightly soiled. The lighting up of
the yellow LED is an optical request to the user to
clean the burner pot.
The lighting up of the red LED means:
If the stove is heated further by the user while the
yellow LED is lit and the burner pot is not cleaned,
then the soiling of the burner pot will progress
further. In further succession, the required volume
of air will no longer be able to flow through the
burner pot, which has the consequence that the
stove will be set out of operation by means of a
safety shutdown and the red LED will indicate the
fault.
Picture 20: LEDs
9.17 Smoke pipe connection
The diameter of the smoke pipe connection piece
is 100mm. The smoke pipe must be connected to
the chimney in conformity with official guidelines.
For queries in this regard, please contact your
local chimney sweep. Due to the functioning
method of the pellet stove with combustion air
blower, overpressure develops at the flue-gas
outlet and possibly in the chimney. That means,
that the flue-gas lines must be designed gas-tight
up to the entry into the chimney.
9.18 Mains cable and main switch
Important! The power supply to the pellet stove
must be available at all times! There must be no
timers or other electrical switches used in or
before the stove. Otherwise your pellet stove can
suffer damage. The main switch for your pellet
stove is located next to the mains cable
connection.
Picture 21:
1. Main switch
2. STB (safety temperature limiter)
3. Mains cable connection
4. Room temperature sensor (output)
5. Air filter
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn ECO-PELLET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn ECO-PELLET in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn ECO-PELLET

Haas-Sohn ECO-PELLET User Manual - German - 43 pages

Haas-Sohn ECO-PELLET User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info