811928
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
4.2. Inlet of combustion air
It is necessary to ensure that in the place of location of the stove there would be available sufficient combustion air.
4.3. Input connection of external air(provided it is installed)
We recommend to employ an input connection of external air for the
supply of combustion air, so that precious air from the living room might not
be consumed during heating.
We do not recommend to bring cold air from outside to the room by
means of direct conduction; it could bring about formation of condensate.
5. Operation of the fireplace stove
5.1. Suitable fuels
The fuels approved for combustion and the maximum stoking amounts of fuel are shown in the specification of the
appliance.
The length of the fuel varies from 29 cm to 33 cm, depending on the combustion chamber.
Orientating value (depending on the type of the wood):
1kg of fire wood = about 4kW
1kg of wood briquettes = about 5kW
Wood briquettes expand during combustion, and therefore, they ought to be broken to pieces.
5.2. Unsuitable fuels
Never use for heating any waste, wallpapers, rests of chipboards, plastics or impregnated wood! When combusting
such materials, the appliance can suffer damage, by the consequence of which any guarantee ceases to exist.
5.3. First putting in operation
Prior to first putting in operation, it is necessary
To remove stickers, if there are any.
To take out all accessories from the ash-pan or from the combustion space.
Check whether the return draft boards (see the specification of the appliance spare part combustion
space, figure A) are mounted in their embeddings. These can shift during the transport or installation of
the fireplace stove.
During the first putting in operation, a stench can be produced for a short time. Please provide for this time
sufficient ventilation of the room where the stove has been installed, and avert direct inhalation.
5.4. Ignition with the air control EASY CONTROL
First of all, lay logs according to their size (about 1.5 2.0 kg) on the bottom of the combustion space or
on the grate, lay on them a block of solid fire-brand, and on the top, sufficient amount of kindling chip (for
ignition). The indicated amount of wood refers to the first ignition ONLY.
The lever must be set up to "Ignition "ON". After the ignition, the door of the combustion chamber is to be
closed.
The course of ignition depends on the draft of the chimney. As soon as complete fuel starts burning lively,
the lever is to be re-set to "Heating operation regime"
Ignition with wood
Heating with wood
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn DK Lausitz - Easy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn DK Lausitz - Easy in the language / languages: English as an attachment in your email.

The manual is 0.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn DK Lausitz - Easy

Haas-Sohn DK Lausitz - Easy User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info