Manual Haas-Sohn COMPACT-PELLET 310 (page 15 of 40) (English)

812036

Zoom out

Zoom in

1/40

7.3. Selection of operating mode

The controller enables a simple selection of the

modes „Heating“ and „Auto“ (weekly program).

7.3.1 Mode „Heating“

The keys on the control unit are described in

chapter 6.

In this mode, the operator can set the required

target room temperature (between 10°C and

30°C) using the four control keys on the control

unit.

In each case, the stove warms the room to the

required target room temperature and on reaching

this and running through the cooling program,

switches to the operating state „Standby“.

While the stove is operated in this mode, the

room is heated again and again to the set target

room temperature, day and night, i.e. during this

mode, with regard to the required room

temperature no differentiation is made between

day and night or other periods.

7.3.2 Setting the target room temperature in

mode „Heating“

Continue to press the left key until the information

page appears.

Then press the lower middle key

Now the programming window is opened, in

which the required target room temperature is set.

The explanation of the keys or their functions is

indicated in the bottom row in this programming

window.

With the middle up key, the required target room

temperature is increased in „1°C steps“. With the

middle down key, the required target room

temperature is decreased in „1°C steps“.

With the left key, the programming window is

closed, without a new target room temperature

being saved.

With the right key, this programming window is

closed and the new input target room temperature

is saved.

7.3.3 Mode „Auto“ (Weekly program)

In this mode the operator can freely select three

ON- and OFF times per day (per 24 hours) for

each of the seven weekdays, in each case with

the associated target room temperatures

(between 10°C and 30°C) required by the

operator.

7.3.3.1 Setting date and time

Before operation with the weekly program, the

date and time is to be set.

Method:

¾ Continue to press the left key until the

information page appears

¾ In the information page, press the right

key (menu)

¾ The main menu now appears

¾ In the main menu, with the two middle

keys position the cursor on Date / Time

¾ Press right key (select)

¾ Now the programming window for date

and time appears

¾ In the programming window, press the

right key (change)

¾ Now the programming is activated – with

the right key (arrow) select the field to be

changed

¾ With the two middle keys (+ / -) perform

the change

¾ Run through the programming window

with the right key (arrow) until the function

„Save“ appears in the bottom text row

¾ Press right key (Save) – the change is

saved

¾ Press left key (back) – main menu

appears

7.3.3.2 Mode „Auto“ (Weekly program)

With this mode, the programming must be

performed for each weekday.

The stove heats the room to the respective

required target room temperature and on reaching

this and running through the cooling program,

switches to the operating state „Standby“

This mode enables an adaptation of the target

room temperature to the personal heating

requirement.

7.3.3.3 Setting the target room temperature in

mode „Auto“ (weekly program)

Continue to press the left key until the information

page appears.

Then press the lower middle key.

Now the programming window is opened, in

which the weekdays can be selected.

With the two middle keys, the weekday can be

selected in the second row with the cursor (the

selected day is that one which is underlined with

the cursor).

After successful selection with the cursor, press

the right key (change)

Now the programming window for the selected

day appears

In the first column are the position numbers 1, 2

and 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn COMPACT-PELLET 310 in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn COMPACT-PELLET 310

Haas-Sohn COMPACT-PELLET 310 User Manual - German - 43 pages

Haas-Sohn COMPACT-PELLET 310 User Manual - French - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Haas-Sohn COMPACT-PELLET 310 Manual

Product: