564788
12
Zoom out
Zoom in
Previous page
1/34
Next page
12
7.3..1 “Heating” operating mode
The keys on the operator console are explained in
Section 6.
In this operating mode the operator may set the desired
target room temperature (between 10°C and 30°C) by
means of the four operator keys on the operator
console.
The stove heats the room to the relevant target room
temperature and after reaching this and going through
the Cooling down programme it switches to Standby”
operating status.
Whilst the stove is operated in this operating mode, the
room is repeatedly heated to the set target room
temperature by day and night i.e. during this operating
mode, no distinction is made between day and night or
any other times with regard to the desired room
temperature.
7.3..2 Setting the target room temperature in
“Heating” operating mode
Press the left key repeatedly until the Info
screen appears.
Then press the middle bottom key
Now the programming window in which the
desired target room temperature is set is
opened. The explanations of the keys or their
functions are shown in the bottom line of this
programming window.
With the upper middle key the desired target
room temperature is increased in “jumps of 1ºC
at a time. With the lower middle key the desired
target room temperature is reduced in “jumps of
1ºC at a time.
With the left key, the programming window is
closed without saving a new target room
temperature.
With the right key this programming window is
closed and the just input target room
temperature is saved.
7.3..3 Auto” operating mode (weekly programme)
In this operating mode, the operator is free to select
three switching on and three switching off times per day
(per 24 hours) for each of the seven days of the week
with the relevant associated target room temperatures
desired by the operator (between 10°C and 30°C).
7.3..3.1 Setting date and time
Before operation with the weekly programme, it is
necessary to input the date and time.
Procedure:
Press the left key on the operator console
repeatedly until the information screen appears
In the Info screen, press the right key (Menu)
Now the main menu appears
In the main menu, place the cursor on
Date/Time with the two middle keys
Press the right key (Select)
Now the programming window for the date and
time appears
In the programming window, press right key
(Edit).
Now programming is activated select the field
to be edited with the right key (arrow)
With the two middle keys (+ / -) perform the edit
With the right key (arrow) scroll through the
programming window until the function “Save”
appears in the bottom text line
Press the right key (Save) the change is saved
Press the left key (Back) the main menu
appears.
7.3..3.2 “Auto” operating mode (weekly programme)
In this operating mode programming must be done for
each day of the week.
The stove heats up the room to the relevant target room
temperature and after reaching it and after going through
the Cooling down programme switches to the “Standby”
operating status
This operating mode permits adjustment of the target
room temperature to suit individual heating
requirements.
7.3..3.3 Setting the target room temperature in
“Auto” operating mode (weekly programme)
Press the left key repeatedly until the Info
screen appears.
Then press the middle bottom key.
Now the programming window in which the days
of the week can be selected is opened.
With the two middle keys, the day of the week
can be selected in the second line with the
cursor. (The selected day is the one which is
highlighted by the cursor).
After completing the selection with the cursor,
press the right key (Edit)
Now the programming window for the selected
day appears.
The first column contains position numbers 1, 2
and 3
In the second column, the switch on times
(marked by the letter E) are programmed in 15
minute jumps with the two middle keys.
With the right key (arrow) you can move from
the left column to the right.
In the third column, the switch off times (marked
by the letter A) are programmed in 15 minute
jumps with the two middle keys.
In the fourth column, the desired target room
temperature is assigned to each period that falls
between the relevant switch on and switch off
times.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn CATANIA-RLU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn CATANIA-RLU in the language / languages: English as an attachment in your email.

The manual is 2.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn CATANIA-RLU

Haas-Sohn CATANIA-RLU Usermanual and installation guide - German - 34 pages

Haas-Sohn CATANIA-RLU User Manual - Dutch - 33 pages

Haas-Sohn CATANIA-RLU User Manual - French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info