811878
18
Zoom out
Zoom in
Previous page
1/21
Next page
Art. Nr. 0618018109031
V17 D28
Complete product information, „HAAS+SOHN KOMFORT IV
180.18-AL
Installation of the combustion chamber liner:
Note: Labels with the short designations are attached to the mounting parts.
1. Install first row: first HSM (rear block centre) (top groove rearward), then rear blocks left and right (top groove
rearward) and front blocks.
2. Insert bottom blocks 1, 2 and 3.
3. Insert ash pan (5) and grate (9).
4. Install second row: rear blocks and lateral blocks.
5. Insert insulating block (16) and draught deflector plate (10).
Installation of the insulating block: Insert insulating block (16) with the short edge into the upper sheet steel groove
(see drawing) and let slip into the lower sheet steel groove.
Assembly of thrust reversal plates: insert the thrust reversal plate (Z) askew (chamfered edges at the back) and put
it on the side metal angle bar; then lift the front edge and put it on the support metal sheet.
Important: move the thrust reversal plate (Z) all the way forward!
Then suspend the retaining shackle on the side and at the back on the fireclay. Then put the thrust bottom plate (ZU)
on the metal angle bar.
Important: After cleaning of the appliance, or before returning it to service, checks must be carried out to ensure that
the baffle plates are in the correct position (see diagram).
Suitable fuels:
The following fuels are permitted for use in your wood burning stove (see also section 5.1):
Dry, well seasoned, unadulterated wood and wood briquettes which comply with DIN 51731
No.
Product no.
Description
1
Body of the stove
2
0618018105300
Door to the combustion
chamber
3
Refractory
5
0618018005600
Ashpan
6
0618018015002
Supports for the
exhaust flue
7
0089000020005
Adjustable feet
8
Secondary air
9
0020100130005
Grate 260x152
10
0050500040005
Plate for diverting the
exhaust Glases
angled upwards
11
Air intake control
12
0618516075310
Fitting for the door
handle
13
0420114005371
Door handle
14
0618018025301
Inspection window
15
0088400060005
Door spring
16
0050500050005
Insulating brick
17
0618018105035
Door latch
18
0088500050005
Socket for the pipe
supplying air from
outside Ø 100
19
Air duct
20
0618618005036
Bottom plate
0040710100005
Seal door
0040710100005
Seal glass
1
2
3
5
6
8
9
10
11
13
14
16
17
18
20
718
781
12
19 270150
7
15
Ø100
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn Arlberg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn Arlberg in the language / languages: English as an attachment in your email.

The manual is 4.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn Arlberg

Haas-Sohn Arlberg Installation Guide - German - 20 pages

Haas-Sohn Arlberg Installation Guide - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info