811878
2
Zoom out
Zoom in
Previous page
1/21
Next page
Item No.: 0621800809001
V18C23
2
1 PRELIMINARY REMARKS
Please read the assembly and operating instructions of your fireplace insert before these installation
instructions.
The following are additional parts of these installation instructions:
“Equipment sheet complete”,
When unpacking the concrete elements, possible irregularities (cracks or joints) can be detected if
applicable, these should be filled with the enclosed adhesive.
2 PREREQUISITES
The load-carrying capacity of the floor must always be clarified before installing your fireplace kit.
The total weight of the complete fireplace kit (fireplace with refractory lining and the artificial stone
lining) can amount to approximately 460 to roughly 470 kg depending on the model. With wooden
beam ceilings, it is essential to consult a structural engineer.
Important: Observe the regulation of the fire protection authorities and the national construction
regulations applicable at the place of installation when installing your fireplace kit:
3 TOOLS
For the installation of the artificial stone lining, you will require the following tools:
Water level
rubber hammer
open-end wrench size
13mm
tape measure
Pencil
open-end wrench size
10mm
Steel square 90 o
Sponge
Paint roller
Trowel
gun
4 MATERIAL
Paint
Plaster if required
Water
Acrylic
5 KIT INSTALLATION
1. Carefully unpack the artificial stone lining including accessories. Check your kit for
completeness using the enclosed parts list. Sort the parts in accordance with the installation
sequence (see parts list text and illustration).
2. Adjust the fireplace to the correct height using the open-end wrench size 13mm by turning the
adjustable feet. The ideal height is shown in Figure 2-13. For comparison, install the base with
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn Arlberg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn Arlberg in the language / languages: English as an attachment in your email.

The manual is 4.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn Arlberg

Haas-Sohn Arlberg Installation Guide - German - 20 pages

Haas-Sohn Arlberg Installation Guide - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info