Manual Haas-Sohn ANDRUS WITH EXCHANGER (page 9 of 13) (English)

564834

Zoom out

Zoom in

1/13

Caution! If during the operation any part of the lining gets loose by material dilatation, it is

recommended to increase the spring force.

8.5. Replaceable exchanger (option)

For assembly or disassembly of the exchanger or blind element installation, follow the

procedure below:

Disassembly Disconnect the exchanger from the heating system, unscrew the nuts (use a

wrench), and remove the exchanger.

Assembly:

For the assembly, follow the same procedure in reverse order. Make sure the

contact surface between the exchanger (or blind element) and the fireplace stove casing is

clean – remove residual parts of the sealing (if present). Provide undamaged sealing under

the exchanger (or blind element). Tighten the nuts evenly to provide good tightness along

the whole exchange (blind element) flange.

9. PRODUCT LIABILITY AND SERVICE

9.1. General

Providing that all directions and recommendations in the Instructions for Installation,

Operation and Maintenance are respected, the manufacturer (supplier), company HAAS +

SOHN Rukov s.r.o. provides guarantee for 24- month period from the takeover for

parameters and characteristics of the product as specified in relevant technical standards,

in the Instructions and the data shown in the nameplate.

9.2. Conditions for guarantee

The guarantee covers free-of-charge repair of the fireplace stove or parts or components

(the subject of complaint, if any) providing that the cause of the defect is defective material

or craftsmanship.

9.3. Guarantee and post-guarantee service

Guarantee and post-guarantee service is provided by importer companies or contractual

partner service institutions.

9.4. Claim rejected

The warranty is not related to damage or defects of the device or its components caused

by:

- Contact with chemical substances or physical contact causing damage during the

transport; improper storage; erroneous installation or operation in an improper manner

(for example, cooling with water, dirt from food, water condensate, etc.)

- Wrong product installed (overheating or under-heating in the room)

- Construction and legal requirements not adhered

- Wrong installation or connections

- Poor or too strong chimney effect (the connections must be in conformity with the

standards currently in force)

- Unauthorised alteration or additional modification of the heating system, especially the

firing area or smoke flue system

- Unauthorised persons interference (service work by unauthorised persons)

- Instructions for operation not adhered

- Additional built-in accessories or spare parts not manufactured by HAAS + SOHN

Rukov s.r.o.

- Use of inappropriate kind of fuel

- Erroneous operation, device overload (e.g. the ashpan door open) resulting in

damaged construction (e.g. burnt-through partitions, construction deformation, etc.)

- unprofessional manipulation, mechanical damage by excessive mechanical force

- Lack of proper maintenance or use of inappropriate cleaning agents

- force majeure (floods, etc.)

9.5. How to make a claim

Send a written claim to your sales person, by letter, fax or e-mail. Please specify the

product model, year of manufacture and serial number. (the data from the name plate, at

the rear) It is recommended to copy the nameplate data in the Table below. This way, you

can find it easily whenever needed.

HAAS+SOHN Rukov s.r.o, SNP 474, 408 01 RUMBURK, CZ

FIREPLACE STOVE TYPE

SERIAL NUMBER:

YEAR OF MANUFACTURE:

OUTPUT PERFORMANCE:

If you make a claim, kindly provide your address, phone number and description of the

defect. Ask the seller for guarantee at the purchase. The service centre shall deal with the

problem in shortest time, suggesting the place and time of the service action to the

customer. In case of request on the product replacement or purchase contract made void,

the respective provisions of the Civil Code and the Claim Code will be applied.

9.6. How to order spare parts

At any order, kindly specify the type of the fireplace stove, the year of manufacture and the

serial number of your product. For the spare part identification, follow the Technical Card

(state the name of the part or its ID or position in the drawing). You can order spare parts

and accessories at your local distributor – dealer, or at our partner organisation.

10. MISCELLANEOUS

10.1. Accessories supplied with the fireplace stove

The fireplace stove has been delivered with accessories: protective glove to touch the

regulating elements, ashpan drawer, Instructions for Installation , Operation and

Maintenance, Guarantee and Technical Card, a steel brush (for the exchanger cleaning) –

only with the fireplace stove provided with a removable exchanger).

10.2. Special accessories (on order)

1. Smoke flue pipes, with/without block, diameter 150 mm and 130 mm (length 0.25

m;0.5 m; 1m)

2. Smoke flue elbow with/without cleaning hole, diameter 150 mm and 130 mm (90°, 45°)

3. Chimney stress ring, diameter 150 mm and 130 mm

4. Baskets

5. Fireplace tooling (special offer)

6. Cleaning agent (glass)

7. Blind element

8. Cooling exchanger (loop)

10.3. Recommended spare parts

Spare parts available on order

1. Fireclay brick shapes and VERMICULITE boards for the firing area

2. Ashpan drawer

18 19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn ANDRUS WITH EXCHANGER in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Haas-Sohn ANDRUS WITH EXCHANGER Manual

Product: