382306
6
Zoom out
Zoom in
Previous page
1/10
Next page
U S E R S G U I D E
4
HOW TO ASSEMBLE
THE H2O MOP
®
ULTRA
6) Slide Handle Tube (Part 3)
down into H2O Mop
®
Ultra
Body (Part 8) until it clicks in.
3) Attach Mop Head (Part 16) to
the H2O Mop
®
Ultra
Body (Part
8) by inserting the Swivel Joint
(Part 17) into the designated
hole in the H2O Mop
®
Ultra
Body
(Part 8) as illustrated.
NOTE: To remove the Handle Tube (Part 3) Press the
Button and pull up the Handle Tube as illustrated.
1) Remove Mop Head
locking Clip (Part 15)
located at the bottom of
the H2O Mop
®
Ultra
Body
(Part 8) as illustrated.
4) Put back the Mop Head
locking Clip (Part 15) to
lock in the Mop Head.
Button
U S E R S G U I D E
13
HOW TO USE THE ACCESSORIES
(OPTIONAL ITEMS)
CONTINUED
To use the Round Brushes (Part 4), Triangle Brush (Part 5),
Scoop Nozzle (Part 6) and the Angle Nozzle (Part 9)
attachments follow these instructions:
1. Attach the Extention Hose to the Hand-Held Steamer.
2. Attach the Jet Nozzle to the Extention Hose.
NOTE: You can attach the Jet Nozzle directly to the Hand-Held
Steamer without using the Extention Hose but for better accessibility
we reccomend attaching the Jet Nozzel to the Extention Hose.
3. Attach the desired attachement to the Jet Nozzle.
To attach the Hand-Held Steamer back to the H2O Mop
®
Ultra
Steamer Body:
Remove all attachments
1) Insert the Power Cord in the clip on the side of the Hand-Held Steamer Body.
2) Align and insert the adaptor on the Hand-Held Steamer with the nozzle at the H2O Mop
®
Ultra
Body.
3) Push the Hand-Held Steamer against the H2O Mop
®
Ultra
body until it clicks in place.
4) Lock the Hand-held Steamer by turning back the Hand-Held Steamer Body lock down.
AFTER USE
1) Unplug Power Cord (Part 18) from outlet.
2) Allow Mop Pad to cool down and carefully remove Mop Pad (Part 20) from Mop Head (Part 16), as Mop Pad
could still be hot.
3) Any water remaining in the Water Tank (Part 9) should be emptied prior to appliance storage.
4) Let any water (remained as a product of condensation) drain from the steam nozzle prior to storing the appliance.
5) Wrap Power Cord around Cord Holder (Part 3).
6) Wipe all surfaces of the H2O Mop
®
Ultra
Steamer with a soft cloth. Store in a protected, dry area.
7) Mop Pad can be machine washed in hot water. Disposable pads are designed for one time use.
2) Remove the Hand-Held Steamer from
the H2O Mop
®
Ultra
Body as follows:
a) Unlock the Hand-Held Steamer Body
(Part 13) by lifting up the Hand-Held
Steamer Body Lock (Part 7)
b) Push the Hand-Held Steamer Release
button up (Part 6).
c) Detach the Hand-Held Steamer Body out.
5) Attach the Hand-Held Steamer to
the H2O Mop
®
Ultra
Body and lock in
place using the Hand-Held Steamer
Body Lock (Part 7).
6


Need help? Post your question in this forum.

Forumrules
1

Forum

h2o-steam-mop

Reset search

  • power light will not change from red to green. please help?
    Submitted on 18-7-2022 at 05:57

    Reply Report abuse
  • what do I do if the mop dont steam at all The water is filled to the level indicated I wait for the steam to start but nothing happens I can see the water in the tank is bubbeling a little The kight on the steamer is on But nothing happens Submitted on 11-5-2022 at 17:55

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for H2o steam mop at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of H2o steam mop in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info