Manual H.Koenig UP370 (page 11 of 79) (English, German, Dutch, French, Italian, Spanish)

701102

Zoom out

Zoom in

1/79

MAINTENANCE

1. HV Mesh(Figure10)

After cleaning the dirt cup as figured above, HV mesh and metal filter can be cleaned at the

same time. Lift the HV mesh by hand, then beat it lightly to fall off the dirt on it. If the HV

mesh is very dirty, please clean it with water. After airing then can use. HV Mesh is replaced

by a new one every six months normally.

2. Brushroll After the brushroll working for a long time,there are too much hairs etc

foreign object into the roll, the brushroll will stop to run. Please clean and maintain the

brushroll: put down the vacuum cleaner,carry out the motorized brush,pull the brushroll

cover from the outer side by hand which showing in figure 11.Then use the blade or

scissors clean the brushroll slot(figure12)and clean the hair object. After finishing clean

the object,please take the brushroll fix into the motorized brush,then assembly it into the

main body.

HV MESH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig UP370 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig UP370 Manual

Product: