FOR THE FIRST USE
As there is manufacturing residue or oil remained in the toaster or heat element, it usually
emits the odor for the first use. It is normal and will not occur after several times use. Before
toasting the first slice of bread it is strongly suggested to operate the appliance following
below instructions, except without bread.
OPERATION:
1. Put bread slice into the bread slot, it can be inserted two slices at most every time. Only
the regular slice can be placed into the bread slot. The irregular bread can only be toasted on
the toasting rack and only one piece every time. When toasting on the toasting rack, put the
toasting rack onto the toasting slot, then put the bread on the toasting rack. Ensure the bread
is flatly positioned at the middle of toasting rack. Take down the toasting rack when do not
use.
Note: Make sure the crumb tray is completely positioned in place before using.
2. Plug the power cord into the outlet.
3. Set color control knob to your desired color. There is 9-position level, the lowest is white
and the highest is puce. The bread slice can be toasted to golden color at the position of “5”.
Note: 1) Toasting color for one side is darker than that for double bread at the same level.
2) If toasted continuously, toasting color for the latter bread is darker than the color of
previous cycle at the same level.
3) Please use 1 to 3-positon for toasting one slice bun bread for toast rack in the center.
4. Press carriage handle down vertically until it is positioned in place, the indicator of Cancel
will be illuminated, and toasting begins. Once the bread has been toasted to the preset color,
the carriage handle will be automatically sprung up, and you can remove the bread readily.
Note: The carriage handle can only be latched when the appliance connects to the power supply.
5. During the toasted process, you may observe the toasting color. If it is satisfactory, you may
interrupt the toasting process by pressing the Cancel button at any time.
6. If the bread has been taken out from refrigerator. Set color control knob to your desired
color. Press carriage handle down vertically until it is positioned in place, then press DEFROST
button and the indicator of DEFROST will be illuminated. In this mode it will be toasted to
your desired color.
7. If you want to reheat the cold toasted bread. Press carriage handle down vertically until it
is positioned in place, then press REHEAT button and the indicator of REHEAT will be
illuminated. In this mode toasting time is fixed, so long as time is running over, the carriage
