a. Quando il robot è in carica, il pannello LED gradualmente mostrerà "1111" da sinistra a destra.
b. Una volta che la ricarica è completa, il pannello LED mostrerà "FULL".
c. In stato di standby, il robot emetterà un segnale acustico “Please charge” ("Si prega di ricaricare")
e il pannello led mostrerà " " quando la batteria è scarica.
d. Durante il funzionamento, il robot ritorna alla stazione di ricarica automaticamente e il pannello
LED mostrerà " " quando la batteria è scarica.
Per allungare la durata della batteria:
a. Prima di utilizzare il robot per la prima volta, caricarlo per 12 ore.
b. Caricare il robot non appena la batteria è scarica.
c. Il robot ritorna alla stazione di ricarica automaticamente quando compie la pulizia o quando la
batteria è scarica.
d. Se il robot non deve essere utilizzato per un lungo periodo, caricare completamente la batteria
prima di riutilizzarlo, impostare l’interruttore su OFF e conservare in un luogo fresco e asciutto.
e. S
e il robot non deve essere usato per più di 3 mesi, metterlo in carica per 12 ore, spegnere e
conservare in u
n luogo fresco e asciutto.
2. Azionamento / Standby / Sleep / Spegnimento
A. Azionamento
a. Assicurarsi che l'interruttore sia acceso.
b.
In modalità standby, premere sul corpo principale o ON/OFF sul telecomando per
avv
iare la pulizia.
Nota: Se il robot è in modalità sleep, premere sul corpo principale o ON/OFF sul
telecomando per attivare. Dalla modalità sleep, premendo nuovamente il tasto
nuovamente, il robot eseguirà la pulizia automaticamente.
B. Standby
Standby significa che il robot è acceso, in attesa di essere azionato dall'utente. Può essere
impostato in modalità standby in uno dei seguenti modi:
a.
Durante la pulizia del robot, premere il tasto sul corpo principale per entrare in
mod
alità standby.
b. Durante la pulizia del robot, premere l’interruttore ON/OFF sul telecomando per spegnere il
robot.