701885
15
Zoom out
Zoom in
Previous page
1/73
Next page
FAULT RECOVERY
Fault Recovery
Fault
Cause
Solution
The machine does not
work or the indicator
light of switch is not
lighted
Power-off or fusion of fuse
Check and confirm
The socket is not connected or
plugged in properly
Connect to the power supply and ensure the plug is
plugged in thoroughly
Unfavorable connection of
socket
Check whether the power socket is normal or not
The power switch is not turned
on
Turn on the power switch
The indicator light is on
but there is no steam
The water in water tank does not
reach the designed water level
Fill water promptly
The water tank is not installed in
position
Install the water tank in position
Severe inflection of steam
conduit
Straighten the steam conduit
Water don’t flow into boiler
Shaking water tank or re-placed the water tank
The accessories of
ironing brush are not
fastened
Unaligned grip
Realign and fasten the snap close
Less, discontinuous or
no steam
The water in water tank does not
reach the designed water level
Fill water promptly
The water tank is not installed in
position
Install the water tank in position
Severe inflection of steam
conduit
Straighten the steam conduit
Less volume of steam
Blockage of filter sieve
Wash the clearing plug at bottom
Blockage of water tank
Wash the filter sieve of water tank
Water don’t flow into
boiler
Blockage of water intake
Wash the water intake
The water tank is not installed in
position
Install the water tank in position
Water tank deformation
Used hot water
Replace the water tank
Overflow of water tank
Cracking of water tank
Replace the water tank
Breakage of seal ring
Replace relevant fittings
If the problems above are still not solved, inform the professionals and do not dismantle the machine
without authorization.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for H.Koenig STM45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig STM45 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info