Manual H.Koenig STM45 (page 11 of 73) (English, German, Dutch, French, Italian, Spanish)

701885

Zoom out

Zoom in

1/73

PARAMETERS

Rated power: 2000W

Voltage: 220V-240V~50Hz

Steam pressure: 1.5bar

Steam flow: 45g/min (max)

Tank capacity: 1600ml

PRODUCT OPERATIONS

Ironing:

1. Stand the machine assembled on flat and stable floor. Adjust the height and

spread range of the hanger as required and hang the clothes on it. Ensure

there is enough water in the water tank and the tank is located properly. Plug

the plug into the power socket, select the appropriate gear. Let the machine

preheat for about 40s, waiting for steam of ironing brush.

2. Iron from the main part of clothes, hold the lower hem by hand gently to make the wrinkled part flat and

iron the rippled fibers out by the hot steam (as shown in Picture 2).

3. Press gently the metal panel of ironing brush on the clothes, move the brush up and down at such a

speed that the steam penetrates into the fibers appropriately for hot forming.

4. After ironing the main part, ironing the specific parts from up to down. When ironing the collar, you may

fold the whole collar back, hold one end of the collar by hand, move the ironing brush horizontally and,

during when, be careful of the hot steam (as shown in Picture 3).

5. When ironing the sleeves, pull the sleeves to

straight and move the ironing brush along the

sleeves.

When the ironing brush shake or move from side to side, water bead may be appeared on

the handle of ironing brush ( Danger of scalding ).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig STM45 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig STM45 Manual

Product: