701223
6
Zoom out
Zoom in
Previous page
1/69
Next page
burns.
is too high.
the oven light goes out, allow a couple of minutes for the stone
to rest before adding the pizza. When cooking additional pizzas
one after the other it is best to leave the lid open for a few
minutes in between cooking pizzas with the setting back to 1.
Dirty Stone Base.
Moisture on bottom
of base.
Don’t worry if stone marks. The greater the marks, the better
the flavor it gives the pizza. Just scrape off any excess material
with the wooden shovels.
COOKING ON THE STONE
1. First, ensure the control knob is set to off and have a quick check inside
your Pizza Maker to see that nothing is inside your oven other than the cooking
stone.
2. Plug your Pizza Maker into 230V/1200W plug. To turn your Pizza Maker
appliance on, simply turn the cooking temperature control knob to the medium
heat setting 5. You will notice the heat indicator light go on, this indicates that
your Pizza Maker is pre-heating. By pre-heating your oven before using, you
will achieve better baking results.
3. Your heat indicator light will turn off in approximately 5 minutes indicating
that your Pizza Maker has pre-heated and is ready for use.
4. Place your cooked or un-cooked pizza dough directly onto the wooden
shovels and add your favorite toppings. Never over-fill or mount your topping
too high on your pizza. The topping should always be below the height of the
top-heating coil to avoid burning.
5. Making sure your Pizza Maker is pre-heated, slide your pizza off the
wooden shovels and directly onto the heated stone. Warning, the pizza stone
and the handles will be extremely hot. Do not touch it at any time until it has
had a chance to cool down.
6. Close the lid of your Pizza Maker and turn control knob to 5 and allow
your pizza to bake for 4-5minutes, or until the desired taste. Remember, every
pizza may have a different crust thickness or topping, some pizzas may cook
quicker than others. It is recommended that you open the lid of your Pizza
Maker after 3 minutes to check the progress, if your pizza is not ready, simply
close the lid and continue to cook until your desired taste.
7. If your pizza is cooking too quickly, simply turn the cooking temperature
counter clockwise to a lower setting to reduce the cooking temperature. To
raise the cooking temperature turn the cooking temperature clockwise to a
higher setting.
8. When cooking with a frozen pizza base, allow the dough to thaw before
use. Once thoroughly thawed, slide your pizza directly onto the
heated stone.
9. Do not use sticky dough on the stone or wooden shovels. If your dough
is sticky, we recommend you use a pizza tray to par-cook the pizza then slide
directly off onto the stone, or flour the stone and place dough directly on top.
10. Once you have cooked your pizza, turn the control knob back down to
1.5, then proceed with preparing your next pizza. Once this is ready, place into
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for H.Koenig NAPL350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig NAPL350 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info