701184

H.Koenig MSX254 Manual

10
Zoom out
Zoom in
Previous page
1/61
Next page
• Unplug. • Check that the movable bulkhead is closed
(graduated knob (6) in position “0”). • Carefully clean the part of
the blade to be sharpened. • Reinsert the plug. • Loosen the
locking knob (23) of the sharpener group (10). • Raise the
sharpener group (10), turning it by 180° so that both wheels are
in working position. See Fig. 1. • Lower the sharpener group
(10) until it locks. • Secure the group by turning the locking knob
(23). See Fig. 2. • Switch on. • Press button (26) and let the
blade turn for about 1 minute. When the blade is still, check to
see if any burr has formed on the edge. • After having verified
the presence of burr, switch (5) on and gently press button (27)
for about 3 seconds to remove the burr produced during
sharpening. Put the graduated knob (6) back to "0" position. •
After sharpening, move the sharpener group (10) back to its
original position, see Fig. 3 and clean the edge of the blade and
the wheels by alcohol. • After several sharpening operations,
remove any residue from the sharpening wheel with alcohol and
a brush.
BLADE REPLACING
The blade has to be replaced when it is no more possible to
sharpen it or when the distance between the cutting part of the
blade and the blade protector is more than 6 mm. Return
appliance to the nearest authorized service facility to replace
the blade.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products.
There is a separation of this waste product into communities, you will need
to inform your local authorities about the places where you can return this
product. In fact, electrical and electronic products contain hazardous
substances that have harmful effects on the environment or human health
and should be recycled. The symbol here indicates that electrical and electronic
equipment should be chosen carefully, a wheeled waste container is marked with a
cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for H.Koenig MSX254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig MSX254 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info