701186
8
Zoom out
Zoom in
Previous page
1/60
Next page
5. Do not move the machine to clean it. There are
available and it is recommended to use the proper anti-
cut gloves to act where there is danger of cut.
As you can notice, the slicer has been realized taking into
the maximum consideration the easiness, the swiftness
and the perfect possibility of cleaning it in all its parts.
The cleaning of the machine has to be made at least once
a day or with more frequency if necessary (by each
change of the type of product), paying attention to make
a scrupulous cleaning of all the surfaces which are in
contact with food to be sliced.
If the appliance is dirty, please clean the appliance.
If the slicer stop slicing, it may caused by overheated
motor, please return appliance to the nearest authorized
service facility for examination. It is not necessary to
disassemble the blade for cleaning as it could be
cleaned in all its parts without having to disassemble it.
Use anticutting gloves.
Disassembly of the blade-cover (4).
Loosen the knob (9) unthread it and
remove the
blade-cover disk (4).
Clean the blade (3) on both faces as
indicated in the drawing.
If the sliding carriage stops sliding smoothly, lay the
machine on its side.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for H.Koenig MSX220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig MSX220 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info