• NEVER COVER THE APPLIANCE, even temporarily, as it
may overheat and create a fire hazard.
OPERATING INSTRUCTIONS:
a) Ensure voltage used corresponds with the voltage indicated.
b) Turn the speed control to selected speed:0(off) and speeds 1,2,3 is Slow, Middle,Fast
c) Tilting angles-By pushing the tilt-guard,you can adjust the fan to any elevation preferred
d) Never touch the blades with hand or any object!
e) Do not pull the cord too hard.If damaged after pro-long use,get it repaired by any electrical
repair man.
f) To mount on walls,ensure strong,durable tools are used.Make sure it is properly and firmly
drilled into the wall to support the weight of the fan.
No exchange will be entertained if the above instructions are not followed. Always Test the product
first before purchase.
The high-velocity fan provides more powerful wind than ordinary plastic fans. Draws air off the floor
and circulates through the entire room keeping room cool and breezy. Put near the windows and
it helps exhaust hot indoor stuffy air and pulls in fresh outdoor air.
█ Energy-saving,high velocity motor for maximum air circulation
█ Tilt-adjustment for flexible use
█ Triple speed selection
█ Precision fan blades for powerful wind but low-noise
█ Chrome-stand,solid construction with thermal-protection to
█ prevent motor overheat.
USE OF THE FAN
• Plug in the power cord. Press the start switch on the control unit to the desired position. (0) stop
- (1) slow speed - (2) average speed - (3) fast speed.
• To adjust the fan angle from top to bottom, simply raise or lower the fan head to the desired
position. Guarding, do it only when the fan and stopped and that the plug and disconnected from
the mains.
