Manual H.Koenig BW1890 (page 7 of 180) (English, German, Dutch, French, Italian, Spanish)

701167

Zoom out

Zoom in

1/180

*The difference between code No 23 and 24 is the safety clasp

quantity. Pull up the safety clasp carefully, turn around and take it

out from the keg; replaced it by the sealant (like code No 20 sealant)

provided in the beer cooler, attach it to the beer keg, and pierce it

by cooler piercing pin. (Show as Figure 3).

Figure 1

Important: Before replacing the sealants or piercing the cooler kit,

you must always follow the instructions marked on the keg to

eliminate the excess gas and ensure that the keg has rested long

enough to avoid foam coming out through the cooler piercing pin

/tap faucet. And it is no need to release the gas and replace the seal

rubber if you use Heineken keg, because Heineken keg has its own

CO2 pressure inside, and no need to be provided from outer CO2

pressure system.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig BW1890 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 20,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig BW1890 Manual

Product: