Manual H.Koenig BW1880 (page 10 of 141) (English, German, Dutch, French, Italian, Spanish)

674843

Zoom out

Zoom in

1/141

To assemble the tap mechanism until you hear a “Ka” sound that will

indicate the tap mechanism fixes on the beer keg. (Show as figure

10)

Figure 10 Figure 11 Figure 12

3. Open the beer cooler with 60-80N strength and place the

well-assembled keg into the cooling cavity; Connect the CO2

connector tube and beer outlet tube with the keg lifter tube

connector.

NOTES: make sure all connection of tap mechanism is well

connected, and without damage. And make sure tap valve is on

close status, and the CO2 pressure regulator knob is at “Off” status.

Figure 13 Figure 14

4. Loosen the CO2 bottle sheath (Show as figure 15), insert a

16gram CO2 cartridge in the sheath (Figure 16), and screw the

sheath tightly until you will hear a “Click”(Figure 17), which indicates

that the cartridge seal has been pierced and the CO2 gas can flow

into the keg freely. Make us the bottle sheath is fixed tightly to avoid

the CO2 leakage. Then put CO2 bottle sheath into the top cover.

Beer dispensing unit

Keg seal

Beer keg

CO2 connector

Beer connector

Open

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig BW1880 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig BW1880 Manual

Product: