Manual H.Koenig BW1778 (page 6 of 75) (English, German, Dutch, French, Italian, Spanish)

701168

Zoom out

Zoom in

1/75

2. Install the tap handle connect the tap, make sure both end fit together perfectly. (Show as

Figure 4)

3. Set the water drip tray into the notch provided. (Show as figure 5)

4. Open the beer cooler with 60-80N strength.

Note: Do not connect or disconnect the electric plug when your hands are wet. Before use it,

make sure the voltage is conformity with plug mark, and check whether the power cord is

well connected or not; if not, please don’t use it, and call service center;

5. Put 800ml water into the cooling cavity or pour the water to the max mark (Show as figure

6) (It can work without water, but it can’t display the best performance)

Note: Make sure the drain switch is at “Off” position, and no extra objects in the cooling

cavity.

Figure 6 Figure 7

6. Place the well-assembled keg into the cooling cavity; Connect the CO2 connector tube and

beer outlet tube with the keg lifter tube connector.

NOTES: make sure all connection of tap mechanism is well connected, and without damage.

And make sure tap valve is on close status, and the CO2 pressure regulator knob is at “Off”

status.

7. Plug the beer cooler.

Note: Do not connect or disconnect the electric plug when your hands are wet. Before use it,

make sure the voltage is conformity with plug mark, and check whether the power cord is

well connected or not; if not, please don’t use it, and call service center.

8. Close the top cover of the beer cooler.

The max water

level line (800ml)

Make sure the drain

switch is at “OFF”

position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of H.Koenig BW1778 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

H.Koenig BW1778 Manual

Product: