625728

Gys Wattmatic 170 Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
5
WATTMATIC 100.140.170
WARNINGS
▪ Explosive gas, avoid ame and sparks. During the charge, the battery must be placed in a well
ventilated place.
▪ Protect against rain and moisture.
▪ Your charger must be plugged in an outlet linked to the ground.
▪ if the electricity supply cable is damaged, it must be replaced by the manufacturer, its after sales
service, or a person with the same qualications to avoid any dangers.
▪ Do not use in any cases to charge small batteries or for non rechargeable batteries.
▪ The battery terminal which is not connected to the frame must be connected rst. The other
connection must be done on the frame far from the battery and from the fuel canalization.
▪ After charging, plug off the charger from the outlet, then plug off the clamp from the frame and
the battery in the indicated order.
▪ The charger must be placed in such a way that the socket outlet is always accessible.
▪ The charger must not be used as toy by young children, or used by young children or disabled
persons without any supervision.
▪ This product is to be recycled by selective collection. Do not throw in domestic garbage.
▪ Do not make the clamps enter in short circuit during the charge.
▪ Acids Risk of projections
▪ The user must comply with the use and maintenance specied in this manual to protect them-
selves and those around him, against any risks related to the use of this charger.
GENERAL DESCRIPTION
Congratulations for the selection of this product, which has been designed with great care. To get
the best use of it, please read carefully the following instructions. Keep this instruction manual safe,
you may want to read it again later.
WATTMATIC is designed to charge starting liquid or gel electrolyte lead-acid batteries :
- from 15 Ah to 100 Ah in 6V or 12V for the WATTMATIC 100 (3 or 6 2V elements)
- from 20 Ah to 150 Ah in 6V or 12V for the WATTMATIC 140 (3 or 6 2V elements)
- from 25 Ah to 180 Ah in 6V or 12V for the WATTMATIC 170 (3 or 6 2V elements)
Load curve: WUoU. This curve ensures a 100% charge and maintains the level of charge thanks to
Floating.
CONNECTION IN CHARGER FUNCTION
Preliminary precautions
• For indoor use, with good ventilation.
• Remove the battery caps if there is, and check the level of liquid. If it is not correct; lled up with
distilled water. Clean well the battery terminals.
• Check if the battery capacity and voltage are compatible with your charger.
Connection and disconnection
• Connect the clamps (+ red, - black) to + and - battery terminals, making sure you get a good
electric contact, respecting the following order.
▪ Connect rst the battery terminal not connected to the chassis of the vehicle.
▪ Then connect the other connection to the chassis remote from the battery and any fuel line.
▪ At last, plug in your charger to 230 V 50/60 Hz mains supply.
EN
Translation of the original instructions
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys Wattmatic 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys Wattmatic 170 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info