625704
12
Zoom out
Zoom in
Previous page
1/18
Next page
12
综述
感谢并恭喜您选择了这款我们精心设计生产的机器。为了获得更好的使用效果我们建议您在使用前仔细阅读
这份说明书并保存好以备日后需要时再次查阅。
WATTMATIC 系列充电器设计用于给液态、胶状体电解质铅酸电池充电:
WATTMATIC100用于给电压为6V12V3个或62V单元 ; 容量为15100Ah的电池充电
WATTMATIC150用于给电压为6V12V3个或62V单元 ; 容量为20150Ah的电池充电
WATTMATIC180用于给电压为6V12V3个或62V单元 ; 容量为25180Ah的电池充电
充电连接
准备措施
室内使用、保持通风良好。
如果电池有管塞,先取走塞子,检查确认电解液量是否合适,如果不合适,添加蒸馏水。清
好电池端子。
确认所需充电电池的容量和电压与充电器所能满足范围相符。
连接和断开
将两个充电夹按以下的步骤正确地接在电池连接柱上
首先连接不和车身底盘相连的端子。
再在远离电池及燃料管的地方将其连接到与底盘相连的端子上。
最后,将充电器接在230V 50/60Hz的电源上。
-
若使用Wattmatic100,确认充电状态指示灯已亮。
-
若使用Wattmatic150/180,将机器开关打开,并确认充电状态指示灯已亮。
充电后,切断充电器电源然后断开车身底盘端子连接线,最后是电池连接线。
充电过程的监管
橙色和绿色灯指示电池的充电状态:
连接电池后橙色灯亮表示充电正在进行。
绿灯亮表示充电已完成。
如果橙色灯一直亮,机器已充电超过24小时,停止充电(参考硫化蓄电池部分)
防护
们给机器加设了最大程度的防护措施:
绝缘夹的配置
外置插片保险丝可以防范反接造成的危险。这也正是机器外壳上保险丝的重要性所在。
机器有针对不合格电池或错误操作可能导致的过流的保护
热保护:变压器上配置有温度保护器(冷却:大约0.25小时)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys WATTMATIC 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys WATTMATIC 100 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info