665828
12
Zoom out
Zoom in
Previous page
1/25
Next page
W5S-4L
EN
The welding wire speed is not constant.
The wire skids in the rollers Check the roller pressure or replace it.
Frein de bobine trop serré
Desserrer en agissant sur la vis de frein de la
bobine de l
Covering wire guide in the torch Vérier la torche
incompatible. Vérier la pression des galets
Reel brake too tight Adjust the reel brake
The torch is bent which might inhibit the wire
output
Check the torch
The rollers slide over the wire Check and tighten the roller screws
Sheath crushed Change it
Roller grooves do not match the diameter of
wire used
Change for size suitable for wire used.
The wire speed potentiometer is not working
The button on the separate wire feeder is
inactive but active on the generator
Refer to the user manual of generator to make
the change
MACHINE MAINTENANCE DETAILS
Machine maintenance or alteration should only be carried out by a qualied person. Failure to comply may void the warranty. Any maintenance or
action performed on the machine should be done with power supply off (machine disconnected from the power supply network), wait at least 5
minutes before any operation, block access to the installation if necessary.
Daily :
- Check the torch, the rollers and the tightening, the connections.
Twice a year :
- Clean the inside of the machine with a compressed air cleaner.
- Make sure not to put any conductor inside the machine, such as the torch.
- Check the wear and coupling of the connections, retighten if necessary.
- Check the following parts: electrical, gas, wire reel support, wire-feeding motor and bottle support.
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys W5S-4L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys W5S-4L in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info