665750
13
Zoom out
Zoom in
Previous page
1/60
Next page
13
TRIMIG
EN
COMMAND KEYBOARD (FIG-V)
Choice of the welding mode (2)
- NORMAL (2T) : standard welding 2T
- NORMAL (4T) : standard welding 4T
- DELAY : « chain stitch » function, with spot delay setting
- SPOT : spot function, with adjustment of the spot diameter
Wire speed adjustment potentiometer. The speed varies from 1 to 15m/
minute.
SPOT/DELAY potentiometer (5)
Manual mode (1)
In manual mode, the wire speed is determinated by the user by adjus-
ting the potentiometer (4).
Synergic mode (3)
Set the potentiometer (4) in the middle of the « OPTIMAL SYNERGIC »
zone.
In this mode, the device determines the optimal wire speed according
to 3 parameters:
- Voltage
- Wire diameter
- Wire type
It is possible to adjust the wire speed +/- with the potentiometer (4).
«MANUAL» MODE (FIG-V)
To set your device, proceed as follow:
• Choose the welding voltage using the 7-10 or 12 positions switch (depending on the product)
- Example:
To weld 1 mm thick steel, set the switch to 1
• Adjust the wire speed with the potentiometer(4).
- Recommendations:
The wire speed adjustment is often determined « with the assistance of sound »: the arc must be stable and have a low crackling. If the speed is
too low, the arc is not continuous. If the speed is too high, the arc crackles and the wire pushes back the torch.
«SYNERGIC» MODE (FIG-V)
With this function, no need to adjust the wire speed anymore.
• Set the wire speed potentiometer (4) in the middle of the« Optimal synergic » zone. • Select:
-The wire type (3)
-The wire diameter (3)
Then to select the right position in accordance with the thickness of the workpiece, please refer to the table «Synergic mode» g. VI. From this com-
bination, the device determines the optimal wire speed and the device is ready to weld. It is also possible to adjust the wire speed if necessary by
adjusting the potentiometer (4) + or – manually. Settings are saved and loaded each time the user switches the machine back on.
RISK OF BLESSING RELATED TO MOBILE COMPONENTS
The wire feeders contain moving parts that may catch hand, hair, clothes or tools which can lead to injuries! Take extra care.
• Do not place your hand on mobile/pivoting/wire feeding parts of the machine!
• Make sure that all panels remain closed when in use !
Do not wear gloves when setting up the wire and changing the wire reel.
RECOMMENDATIONS AND THERMAL PROTECTION
• Ensure the air intakes of the device are not blocked to allow adequate air circulation.
• Leave the device plugged after welding to allow its cooling.
• Thermal protection: The light turns on and the cooling duration is a couple of minute according to the area temperature
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys TRIMIG 250-4S.DV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys TRIMIG 250-4S.DV in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info