786856

Gys Smart USB Module Manual

10
Zoom out
Zoom in
Previous page
1/40
Next page
contains the order and status. For the Getter, the answer contains the order and the data if everything goes well.
Otherwise, the answer contains the order and status.
Setter Getter
request: control + data
answer: control + data
OR
request: control + status
request: control
request: control + status
SYNTAX
The exchanges between the computer and the SUM are done in ASCII characters.
Each request and response ends with <CR><LF>(or 0x0D0A or «\r\n»).
The command name contains no spaces.
The name of the command is followed by an equal «=».
In a Setter request and a Getter response, the data follows the equal sign «=». They are separated by a semicolon
«;». For decimal data, the decimal separator is «.». The data are shown without units.
For a Getter request, a question mark «?» follows the equal sign «=».
The status has 2 values: «OK» or «KO».
Example of exchanges between the computer and the SUM :
«
Process_state=
run
<CR><LF>
» the computer asks to start the load.
«
Process_state=
OK
<CR><LF>
» the SUM returns the correct acknowledgement of the order.
«
Process_state=
?
<CR><LF>
» asks for the status of the current process.
«
Process_state=
idle
<CR><LF>
» returns the value requested here IDLE (stopping process).
«
Process_sta=
?
<CR><LF>
» request for Getter badly formed, the command name does not exist.
«
Process_sta=
KO
<CR><LF>
» returns an error response.
«
Date=
2020
;
13
;
31
;
08
;
53
;
10
<CR><LF>
» updates the product date with a wrong value (MM=13).
«
Date=
KO
<CR><LF>
» returns an error status.
LIST OF GETTER FOR GYSFLASH CNT
Typical Getter
request Gysash CNT answer Arguments
Names Possible values Description
Version=? Version=
Produit1
;
HW_version1
;
SW_version1
;
Produit2
;
HW_version2
;
SW_version2
…
Produit1
Produit2 e.g.:
GYSFLASH 121.12 CNT
Smart USB module
Name(s) of the product(s) pre-
sent on the SMC network
HW_version1
HW_version2 e.g.:
HW 1-2
HW E0046IND1-0
Associated hardware version
SW_version1
SW_version2 e.g.: SW V06.01 Associated software version
Serial=? Serial=
Produit1
;
SN1
;
Produit2
;
SN2
…
Produit1
Produit2 e.g.:
GYSFLASH 121.12 CNT
Smart USB module
Name(s) of the product(s) pre-
sent on the SMC network
SN1
SN2 e.g.:
20.02.026971.000001 Associated serial number
Product_info=? Product_info=
U
;
I U 0 to 48 in V Charger voltage
I0 to 120 in A Current charger
P
roduct_name=? Product_name=
product_name product_name e.g.: GYSFLASH 121.12
CNT Charger's name
MMI_state=? MMI_state=
MMI_state MMI_state lock Locked
unlock Unlocked LOCK : Locking the charger
interface buttons. In this con-
guration, only the SUM can ma-
nage the charger.
Mode=? Mode=
mode mode init
charge
BSU
Voltage_test
CCA_test
Alternator_test
settings
Type of mode in use
10
SMART USB MODULE EN
Translation of the original instructions
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys Smart USB Module at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys Smart USB Module in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info