665731
9
Zoom out
Zoom in
Previous page
1/50
Next page
9
DESCRIPTION
Thank you for choosing our product! In order to take the most of your welder, please read the following
instructions carefully:
The FLEX 250 A CEL is a portable inverter welding machine, for electrode welding (MMA) and TIG Lift in DC. The
machine welds rutiles, basic, stainless steel, cast iron and celulosic electrodes. In TIG, it welds most metals except
aluminium and alloys. It is protected for use on generators.
POWER SUPPLY START UP
The FLEX 250 A CEL is a Flexible Voltage machine can be plugged into a mains supply between 110V and 480V in
single or three phase (50 - 60 Hz). The absorbed effective current (I1eff) is shown on the machine for maximum
useage conditions. Check that the power supply and its protection (fuse amd/or circuit-breaker) are compatible
with the necessary current required for use.
Connection diagram
3
+
Connection to a 3 phase power supply
2
+
Connection to a single phase power supply
*WARNING ! Connection to a single phase plug, the unused wire must be isolated so that it
never comes into contact with the other wires.
Turn on the machine by pressing ( )
This machine is a A-class device. It is designed to be used in an industrial or professional environment. In
a different environment, it can be difficult to ensure electromagnetic compatibility, due to conducted
disturbances as well as radiation.
The FLEX 250 A CEL features primary regulation, it is recommended to use the cables supplied with the
unit.
ELECTRODE WELDING (MMA MODE)
Leave the machine connected to the supply after welding in order to let it cool down.
Thermal protection : when the thermal protection is activated, the cooling time is about 2 to 5 min
depending on external temperature.
Your machine is equipped with 3 functions :
Hot Start gives an adjustable* overcurrent at the beginning of welding.
Arc Force delivers an overcurrent which avoids sticking when the electrode enters the
welding pool.
Anti-Sticking allows easy removal of the electrode in case of sticking.
Selection of MMA Mode and intensity setting :
- Select the MMA position with the selector.
- Adjust the desired current (display ) using the key .
1- phase 1
2- phase 2
3- phase 3
4- Earth
1- phase 1
2- phase 2 ou neutre
3- Earth
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys PROGYS FLEX 250 A CEL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys PROGYS FLEX 250 A CEL in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info