665822

Gys NEOPULSE 270-T2 Manual

23
Zoom out
Zoom in
Previous page
1/50
Next page
23
NEOPULSE 270-T1 / 270-T2 / 300
EN
STD mode
There are phases of: pre gas, creep speed, Hot start, Crater ller and post gas.
BurnBack High : can remove the wire cut pulse, useful for thin sheets.
EASY INTERFACE
As with the PRO interface the top part of the screen allows you to select
the wire diameter, gas-metal combination, welding process (standard,
pulse, manual) and trigger mode (2T, 4T).
The icon allows you to enter the secondary menu of EASY interface.
To enter the welding process menu, you must access PRO interface and
click on the icon.
With the EASY interface, the operator will have access to two parameters:
Metal thickness and arc length
Spot/Delay mode
The Spot mode allows the user to score the metal by adjusting the length of
the point. The Delay mode (or spot and delay) allows the operator to adjust
the welding time of the point and the delay between two points for chain
stitch welding (Available only with EASY interface).
ONLY FOR THE NEOPULSE 270-T2 / 300
Push Pull torch (OPTION)
The Push Pull torch is connected to the connector (3).
Using a Push Pull torch will enable the use of AlSi wire even Ø 0.8 mm with
a 4m torch (ref. 044111). This torch can be used on any mode.
The detection of the Push-Pull torch is made by a simple press on the
trigger.
When using a potentiometer controlled push-pull torch, the interface’s set-
tings allow you to set the maximum value of the adjustment range.
The torch’s potentiometer can then be used to adjust between 50% and
100% of this value.
Connection diagram for Push
Pull torch with potentiometer
(10 kΩ)
1
3
4
7
8
10
+4
-5
+Pot 10
-Pot 3
R
2
+
-
1 8
M
1
3
2
5
4
The digital torch works as follow:
1- Green light (speed:
)
2- Push button: Setting choice
3- Orange light (arc height:
)
4- Incrementing (speed or arc according to button 2)
5- Decrementing (speed or arc according to button 2)
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys NEOPULSE 270-T2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys NEOPULSE 270-T2 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info