665756
36
Zoom out
Zoom in
Previous page
1/52
Next page
36
M1 - T1 & M3 - T3 GYS AUTO
NL
KEUZE VAN DRAADSPOEL
Mogelijke conguraties:
type draad
Toorts 1
T1,T3,M1,M3
Toorts 2
T3/M3
Spool gun
T1/T3/M1/M3
Gas
staal
Ø 300 x
argon
+
CO2
Ø 200 x x
Ø 100 x
RVS
Ø 200 x x
Ø 100 x
CuSi3 Ø 200 x x
argon
pur
CuAl8 Ø 200 x x
Alu
AlMg5
Ø 300 x*
Ø 200 x* x*
AlSi5 Ø 100 x
AlSi12 Ø 100 x
CuSi3: aanbevolen voor OPEL et Mercedes.
CuAl8: aanbevolen voor Peugeot/Citroën/Renault.
AlSi12: aanbevolen voor auto-aluminium voor staaldikte tussen 0,6 et 1,5 mm.
*zorg voor teon mantel / speciale aluminium contact tip .
Verwijder het omhulsel
BEDIENINGSPANEEL (FIG 5)
1- Keuze van de las-module:
-normal (2T) : standaard 2-takt lassen
-DELAY : functie «ketting-lassen», met de mogelijkheid
om de diameter tussen de punten in te stellen.
-SPOT : aftopping functie / spot, met de mogelijkheid om
de diameter van de punt in te stellen.
2- Afstellen van de snelheid :
Draaiknop voor het aanpassen van de draadsnelheid.
De snelheid varieert van 1 tot 15 m/min.
3 - Draaiknop SPOT/DELAY.
4 - Handmatige module :
In de handmatige module wordt de draadsnelheid
bepaald door de gebruiker zelf met behulp van de
draaiknop (2).
5 - Synergetische module :
Zet de draaiknop (2) in het midden van de zone «OPTI-
MALE SYNERGIE».
In deze modus bepaalt het apparaat de optimale
draadsnelheid op basis van de volgende gegevens :
- Spanning
- Draad diameter
- Type draad. Het is mogelijk om de draadsnelheid bij te
stellen +/-
In de positie Normaal (2T) worden 2 modules voorgesteld
om het afstellen van het apparaat te vereenvoudigen :
Handmatig of Synergetisch.
6- Thermische beveiligingslampje op het bedieningspa-
neel : geeft een thermische onderbreking aan wanneer
het apparaat intensief gebruikt wordt.
«HANDMATIGE» MODUS (FIG 5)
Voor het afstellen van uw apparaat, handel als volgt :
- Kies de lasspanning met behulp van de schakelaar met 7 standen
voorbeeld : stand 1 voor plaatwerk van 0,6 mm en stand 7 voor plaatwerk van 4 mm
- Pas de draadsnelheid aan met behulp van de draaiknop (2)
advies :
Het aanpassen van de snelheid van het draad gebeurt vaak «op het gehoor» : de boog moet stabiel zijn en heel
weinig knetteren.
Als de snelheid te laag is, zal de boog niet continu zijn.
Als de snelheid te hoog is, zal de boog knetteren en heeft de draad de neiging om de toorts af te stoten.
«SYNERGETISCHE» MODUS (FIG 5)
Dankzij deze functie is het niet meer nodig om de draadsnelheid te regelen.
Handel als volgt :
- Plaats de draaiknop (2) voor de draadsnelheid in het midden van de zone «Optimale Synergie»
- Kies :
- Het type draad (5)
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys M3 GYS AUTO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys M3 GYS AUTO in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info