665756
33
Zoom out
Zoom in
Previous page
1/52
Next page
33
M1 - T1 & M3 - T3 GYS AUTO
IT
- Inserire la vostra bobina
- Per inserire il lo nei rulli applicare una pressione sulla «vite di regolazione della tensione dei rulli».
- Rimuovere il lo dalla torcia avvolgendo la bobina.
- Togliere la torcia.
- Collegare il connettore di potenza della spool gun al connettore della torcia 1.
- Collegare il connettore di comando della spool gun.
CICLI DI LAVORO E AMBIENTE DI UTILIZZO
- Il dispositivo presenta una caratteristica di uscita di tipo «tensione costante». Il suo ciclo di lavoro secondo la norma
EN60974-1 è indicato dalla tabella seguente:
X/60974-1 à 40°C
(T ciclo=10min)
I max 60%(T ciclo=10min) 100% (T ciclo=10min)
T1 GYS AUTO 25% à 150A 110A 90A
T3 GYS AUTO 25% à 150A 110A 90A
M1 GYS AUTO 15% à 140A 80A 60A
M3 GYS AUTO 15% à 140A 80A 60A
Nota: Le prove di riscaldamento sono state effettuate a temperatura ambiente e il ciclo di lavoro di 40° è stato deter-
minato per simulazione.
- Questi apparecchi sono di classe A. Sono progettati per un impiego in un ambiente industriale o professionale. In un
ambiente diverso, potrebbe essere difcile assicurare la compatibilità elettromagnetica, a causa dei disturbi indotti o
irradiati. Non usare in un ambiente con presenza di polveri mettalliche conduttive.
- I M1, M3, T1 e T3 sono conformi alla CEI 61000-3-12, a condizione che la potenza di corto-circuito Ssc sia superiore
o uguale a 1,8MVA al punto di interferenza tra l’alimentazione dell’utente e la rete pubblica di distribuzione. È responsa-
bilità dell’installatore o dell’utilizzatore del dispositivo assicurarsi, se necessario consultando il proprietario della rete di
distribuzione, che il dispositivo sia collegato unicamente ad un’alimentazione tale che la potenza del corto-circuito Ssc
sia superiore o uguale a 1,8MVA
CONSIGLI E PROTEZIONE TERMICA
- Rispettare le regole classiche di saldatura.
- Lasciare le aperture d’aria del dispositivo libere per l’entrata e l’uscita d’aria.
- Lasciare collegato il dispositivo al termine della saldatura per permetterne il raffreddamento.
- Protezione termica: la spia si accende e la durata del raffreddamento è di qualche minuto a seconda della
temperatura ambiente.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys M3 GYS AUTO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys M3 GYS AUTO in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info