625718
22
Zoom out
Zoom in
Previous page
1/24
Next page
22
• Sluit de rode kabel ("+") op de positieve pool van de accu ("+"), en vervolgens
de zwarte kabel ("-") aan de chassis van het voertuig.
d- Het opladen van een accu met de massa aan de positieve pool:
• Controleer of de rode kabel (aangesloten op de "+" pool) niet in contact is met
de brandstofleiding of de accu.
• Sluit de zwarte kabel op de negatieve pool van de accu ("-"), en vervolgens de
rode kabel ("+") aan de chassis van het voertuig.
Het opladen van een accu die niet aangesloten is aan het voertuig.
Sluit de rode kabel ("+") op de positieve pool ("+"), en vervolgens de zwarte kabel ("-
") aan de negatieve pool van de accu.
Makkelijk aansluiten via de kabels met accupoolklemmen (acc.n°12 en 13)
1- bevestig de rode klem kabel op de positieve pool van de accu.
bevestig de zwarte klem kabel op de negatieve pool van de accu.
Na het opladen, haal eerst de lader uit het stopcontact, verwijder vervolgens de chassis-
verbinding en aan het einde de accu-verbinding.
LAAD MODUS SELECTIE
Na het aansluiten op het stopcontact, selecteer de laad modus met behulp van de knop. .
Mocht de accu aan het einde van het laden nog steeds verbonden is, zal de lader een
onderhoudsladen uitvoeren, zelfs als de gebruiker van de modus verandert. Deze beveiliging
vermijdt de beschadiging van de accu.
MODUS (7.2V/750mA)
Selecteer Modus 1 met de knop to select Mode 1. Het lampje gaat aan. Als er
geen modus is ingeschakeld, zal het elektronische systeem automatisch opladen (750mA ± 10%).
Het laden wordt aangegeven door het rood "Charge" LED.
Tijdens het laden blijft dit rood lampje aan totdat de accu wordt opgeladen (7.2V±0.25V). Het
einde van het laden wordt aangegeven door het groen "Charge" LED.
MODUS (14.4V/750mA)
Selecteer Modus 2 met de knop Het volgende lampje gaat aan. Als er geen modus is
ingeschakeld, zal het elektronische systeem automatisch opladen (750mA ±10%). Het laden wordt
aangegeven door het rood "Charge" LED .
Tijdens het laden blijft dit rood lampje aan totdat de accu wordt opgeladen (14.4V±0.25V). Het
einde van het laden wordt aangegeven door het groen "charge" LED.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSTECH 750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSTECH 750 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info