Manual Gys GYSPACK OBD (page 6 of 19) (English, German, French, Italian, Spanish)

625814

Zoom out

Zoom in

1/19

If the equipment or the vehicle connected to the GYSPACK OBD needs more than 4A or has a short

circuit, the electronic protection of the GYSPACK OBD will switch on and cut the power supply. To use it

again and enable the protection, it is necessary to disconnect the 12V DC plug or the GYSPACK OBD.

Use on OBD plug

Before using this feature you must be sure that all the energy consumers of your vehicle (fan, lights,

onboard computer…) are switched off:

1- Check the internal battery of the GYSPACK OBD is charged (read « Test of the internal battery»).

2- Connect the cable with the OBD connector to the vehicle.

 Check that the connector is properly plugged into the vehicle.

3- Switch on the product.

4- Disconnect the battery from the vehicle and put the cables on a non conducting surface.

Attention: The electrical system of the vehicle receives current from the OBD Memory Saver via the OBD plug.

However the battery terminals are still supplied with power. It is necessary to insulate them and avoid any contact

with a metallic part or any conducting object which can create a short circuit.

5- Once the battery is connected to the vehicle, disconnect the OBD plug.

6- Charge the product after use.

Use as a 12V POWER supply via the cigarette lighter plug

This product gives you a 12V power supply via the cigarette lighter plug:

7- Check the internal battery of the GYSPACK OBD is charged (read « Test of the internal battery»).

1- Check the equipment that you want to connect to the GYSPACK OBD is switched off then connect the unit via

the cigarette lighter connection.

2- Switch on the equipment. The GYSPACK OBD will supply the power needed.

3- Switch off the equipment after each use, disconnect the cigarette lighter connection and plug the GYSPACK

OBD into the mains supply to charge it.

Important: Do not use the OBD plug as a power supply for the on board electronics (onboard computer,

radio) because you can damage the internal battery.

No warranty on the battery

The internal batteries are active components; their life depends on your use and maintenance. The internal batteries

must be charged after EACH use. High temperatures will considerably reduce the battery charge. After a long period

without using the Gyspack OBD, it is recommended to charge the internal batteries again before using.

For this reason the Gyspack OBD battery is not covered under the warranty.

Advice and caution

 GYSPACK OBD must be stored in a vertical position. Horizontal positions should only be temporary.

 Store your machine indoors, ensuring the area is well ventilated.

 Recharge the GYSPACK OBD in a ventilated area, and do not create any sparks in a near location.

 The machine has to be placed for the main socket to be accessible.

 Examine GYSPACK OBD charger regularly to detect any damage. If it is damaged, it should not be used until

repaired.

 If the casing of the charger is damaged, it should be replaced by the manufacturer under its after sales service

 Do not open the device. Any modification not made by a GYS technician would invalidate the warranty cover.

 GYSPACK is an electrical product, subject to particular waste. Do not dispose in domestic bins.

 This device is delivered with a CEE 7/7 Plug.

 It has to be connected to a 230V socket, including earth connection

 GYSPACK should not be used by young children.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSPACK OBD in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gys GYSPACK OBD Manual

Product: