786854
7
Zoom out
Zoom in
Previous page
1/32
Next page
7
GYSPACK OBD EN
Translation of the original instructions
If your eyes or skin come into contact with battery acid, rinse
the affected part of the body with plenty of water and seek
immediate medical assistance.
Connection / disconnection:
Disconnect the power supply before connecting/
disconnecting the device to/from the battery.
The terminal of the battery that is not connected to the car
frame must be connected rst. The other connection must be
made on the car frame, far from the battery and the fuel line.
The battery charger must be connected to the power supply
network.
After the starting/charging process, disconnect the booster/
battery charger from the power supply network and remove
the connector from the car frame and then the connector
from the battery, in this order.
Connection:
• Class II device (charger booster)
• Class III device (booster)
Maintenance:
The power supply cable cannot be replaced. If the cable is
damaged,the device should not be used.
Service should be performed by a qualied person
Warning! Always remove the power plug from the wall
socket before carrying out any work on the device.
Under no circumstances should solvents or other aggressive
cleaning agents be used.
• Clean the device’s surfaces with a soft, dry cloth.
Regulations
• The device complies with European Directive.
• The certicate of compliance is available on our website.
EAC conformity mark (Eurasian Economic Commission)
Equipment in compliance with British requirements. The
British Declaration of Conformity is available on our website
(see home page).
• Equipment in conformity with Moroccan standards.
The declaration Cم (CMIM) of conformity is available on our
website (see cover page).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gys GYSpack OBD Memory Saver at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gys GYSpack OBD Memory Saver in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info